Hire Machining Designers in United States

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a...Read more

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a principle I live by and I understand that designs should be manufacturable. I have knowledge of and experience with various fabrication processes including but not limited to 3D printing, machining, and welding. My professional certification was given to me by Texas after rigorous testing and peer review. My area of testing was in Machine Design and Materials. I can perform FEA analysis and make sense of the results, allowing me to make good engineering recommendations for a given problem. I have spent the majority of my professional career designing dP (differential pressure) flow meters in accordance to ASME Boiler and Pressure Vessel Code as well as the accompanying ASME B31 series. I am very familiar with reading codes and standards and designing accordingly. This experience has also given me a strong understanding of GD&T. I am a good fit and so are my designs.

Mechanical Engineer based in Houston, Texas, USA with extensive experience in design and drafting. Proficient in SolidWorks with strong analytical skills, and a history of innovative solutions to...Read more

Mechanical Engineer based in Houston, Texas, USA with extensive experience in design and drafting. Proficient in SolidWorks with strong analytical skills, and a history of innovative solutions to complex problems.

Mechanical Design Engineer Certified SolidWorks Expert 10+ years SolidWorks Experience 6+ months CAD Crowd Freelancing Experience BS Mechanical Engineering with professional experience in OEM and...Read more

Mechanical Design Engineer Certified SolidWorks Expert 10+ years SolidWorks Experience 6+ months CAD Crowd Freelancing Experience BS Mechanical Engineering with professional experience in OEM and Reverse Engineering prototype and design. Wide range of product design knowledge including sheet metal structures, weldments, injection molding, casting, machining, and more. Worked on a high level engineering team of over 40 cross-fuctional engineers that release highly regulated casino gaming cabinet hardware and software for commercial use worldwide. Bring products from ideas to production ready parts and assemblies prepped for mass production. Consistently deliver accurate models and manufacturing drawings to companies to help bring their products to market quicker and with less risk.

Over 6 years of hands-on experience. Majoring in Automation Engineering. In 2012 - Became a Certified Solidworks Associate. - Employed as a CNC Machine Operator with Solar Precision Products...Read more

Over 6 years of hands-on experience. Majoring in Automation Engineering. In 2012 - Became a Certified Solidworks Associate. - Employed as a CNC Machine Operator with Solar Precision Products in Burbank, California. In 2014 - Employed as a designer with Glenair Inc. In 2016 - Graduated with an AS degree in Engineering Design, from Pasadena City College. - Certified CAD/CAM Technician, from Pasadena City College - Transferred to California State University, Northridge. 2017 - Manager for Lobart Company, a Manufacturer, design firm, and machine shop, in Pacoima C.A. In 2018 - Drafting and Design Independent Contracting with, Hamilton 3D in Santa Clarita, Cross-up Welding in Santa Clarita, Clear Console in Valencia, and more.

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace,...Read more

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photonics, Oil and Gas, Telecommunication industries, where I successfully completed jobs. My areas of strength are thermal system, structural , laser system, etc design engineering and simulation. I have participated in government contract works for defense contractors and small SBIR companies. I also have collaborated with fast prototype and high end, low cost machine shop who are capable of doing both machining and sheet metal fabrication. I will look forward to working for you. I am available 24/7 through text message and email, in most time, I will get back to you within few hours. Thank you. Steve

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently...Read more

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm using Fusion 360 to create mechanical models, FEA, engineering drawing as well as generating g-code for CNC manufacturing. I also have knowledge in proper material selection for the parts based on the function, environment, cost, adaptability as well as service life of the part. My experience is mostly focused on the design of mechanical parts, mechanical analysis (FEA, material selection) and manufacturing (Machining, additive manufacturing). I have a bachelor's degree in mechanical engineering technology from Montana State University. I have been a member of a design competition offered by TechSoft3D.com. My design was concept electric jet engine for commercial airliner

成长在一个先进的mult-axis数控机器shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of...Read more

成长在一个先进的mult-axis数控机器shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of theory and deep experience in the hands on / real world aspects of how precision industrial, medical, food processing, commercial, aerospace and consumer product products are conceptualized, prototyped and later produced and sourced. I have substantial experience in multi-axis CNC programming for high-speed, horizontal and vertical milling centers as well as multi-axis Swiss lathes (Citizen) via Mastercam. I am very well versed in a variety of materials and have years experience programming complex, multi-surfaced components to simple components, for short run prototypes, high speed, long run production and high-confidence lights out operations. In addition I have many years experience in CAD modeling and design via Solidworks 2018 including part, assembly and prints of which I also own one seat of latest 2018 version including Solid Works Simulation and the new, very impressive Solid Works Visualize. With Visualize I have the ability to not only design full solid models and assemblies but also create incredible, rendered real world pictures and images. I have designed, prototyped, sourced and brought to market several products from the ground up in various market segments including industrial, medical, food processing and aerospace. (including sheet metal, injection molded parts and of course precision machined parts with very tight tolerances). I currently own a Okuma MB-4000H Multi-Axis Horizontal Milling Center in which I can complete advanced protoypes to high speed, long run production runs. I am very confident that my education, real world experience and upbringing in a CNC environment has given me the ability to not only boldly design and or program components and products with disruptive, world class mechanical characteristics, it has given me the hands on experience to also design within the mindset of key variables like machine-ability and optimal material selection as this directly relates to final product cost. I have deep experience in optimization of solid model product design for machining and injection molding as well. I also hold several patents within the industrial and packaging spaces. I welcome any inquiry, as someone that truly enjoys this innovative space, I take projects with the assumption as if they were my own products. I embrace deep communication and work with the latest versions of all software I am versed in, with a deep emphasis on leveraging the amazing digital world we live in. I am willing to negotiate hourly rate based on the project.

✅3 d CAD模型、计算机辅助设计、三维扫描/ Digitizing, Mechanical Engineering ✅ GD&T Drawings, Patent Drawings, Napkin CAD ✅ Stress Analysis, CFD Analysis >>>> Call MIL-SPEC Designs <<<<<...Read more

✅3 d CAD模型、计算机辅助设计、三维扫描/ Digitizing, Mechanical Engineering ✅ GD&T Drawings, Patent Drawings, Napkin CAD ✅ Stress Analysis, CFD Analysis >>>> Call MIL-SPEC Designs <<<<< email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Phone/Text: (81Ց)7Ꝯ5-8OӠꝮ Unlock Your Inventive Potential with MIL-SPEC Designs "We'll Bring Your Inventions & Dreams to Life" We are an American owned and operated computer aided design service. (CAD) And we'll provide you with the personalized service required to fill your needs. Introduction: I have over 20 years experience as a mechanical engineer specializing in mechanical design and manufacturing. I also have a degree in electronics. I was a CAD freelancer and machinist for five years before being hired full-time with one of my clients, where I worked for three years designing, manufacturing and testing pumps. Subsequently, I was hired by another client, a defense contractor as their Chief Engineer for eight years where I designed and tested numerous components and assemblies for aircraft and other systems, I also wrote technical manuals for these projects. Along the way, I designed, built and patented a camera stabilization platform (patent #9,▒▒▒,▒▒▒). I also operate a full range of conventional and CNC machinery, 3D printers, and laser cutting and engraving centers. These experiences have enriched my skill set and professional background in these fields. As a fellow inventor and small business owner, I understand the challenges of turning innovative ideas into reality. With over [insert your years of experience] years of expertise in CAD design and engineering, I am here to help you bring your concepts to life and turn them into tangible, manufacturable designs. Services Offered: I can work with your design concepts, sketches, and images to create comprehensive CAD models and assemblies. Utilizing industry-standard software such as Autodesk Inventor CAD/CAM/FEA/CFD, Adobe Photoshop, and more, I ensure your designs are meticulously crafted. I provide precise and clear professional engineering drawings that are ready for manufacturing, ensuring the seamless transition from design to production. Our commitment is to not just meet but exceed your expectations while staying within your budget. We are also ready to sign non-disclosure agreements for projects that require confidentiality. Equipment and Technology: To support our design and engineering work, we have invested in advanced equipment, including: * A 3D printer for rapid prototyping, allowing us to bring your concepts to life in physical form. * A 70Watt CO2 laser engraving center, ideal for engraving, cutting wood and plastics, as well as various marking tasks. * A versatile 2' x 3' CNC router, perfect for machining and shaping a wide range of materials. * Most recently, we've added a 3D laser digitizing scanner, further expanding our capabilities. Flexibility: Whether your project is a single drawing or a large-scale endeavor, we are ready to assist you on a part-time, full-time, or contract basis. Our goal is to adapt to your specific needs and provide tailored solutions. Quality and Affordability: Our commitment is to deliver CAD designs, drawings, and documentation of the highest quality while keeping our services reasonably priced. Your satisfaction is our top priority, and we ensure that you receive exceptional value for your investment. Conclusion: In conclusion, we offer comprehensive CAD design and engineering services that are backed by years of experience, advanced technology, and a dedication to quality and affordability. We are here to partner with you, turning your ideas into reality and helping you succeed in your projects. Let's discuss how we can collaborate to achieve your goals. Unfortunately, I do not specialize in HVAC, architectural design, fashion, landscaping, or civil engineering. The following services are offered: ✅ FREE - Initial consultation. ✅ FREE - Non disclosure agreements. ✅ Mechanical Design - (Assemblies, Gears, levers, linkages, cams, bearings, belts, bushings, seals, nuts, bolts, screws, pins, etc). ✅ Precision Sheet Metal Design & Drawings - (electronics enclosures, instrument panels, manifolds, ducting, etc.) ✅ Molded Product Design - (Injection molds, blow molds, die casting, foundry castings). ✅ Reverse Engineering - (camera CMM, Faro arm, direct measurement, direct volumetric). ✅ Manufacturing Drawings (blueprints) adhering to: GD&T ASME Y14.5. ✅ Patent Application Drawings - (provisional, utility & design patents). ✅ Assembly & Exploded View Drawings - (top level assemblies, sub assemblies). ✅ 3D photo-quality rendering. ✅ STL files for rapid prototyping (3D printing). ✅ IGES/IGS, STEP/STP files - (for CAM, manufacturing & getting quotes from manufacturers). ✅ Conversion of hand-drawn sketches and blueprints to precision 3D CAD models & drawings. ✅ Stress analysis of parts, assemblies and frames to insure proper strength while keeping the physical weight to a minimum. (FEA). ✅

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.Read more

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

学士的机械工程师National Taiwan University in Taipei, Taiwan. Years of experience working with AutoCAD and CATIA. Currently a Design Engineer in Irvine, California...Read more

学士的机械工程师National Taiwan University in Taipei, Taiwan. Years of experience working with AutoCAD and CATIA. Currently a Design Engineer in Irvine, California for an Aerospace Forging Company working with Super-Alloys and Machining. Able to create 3D models, and draft drawings. I have a passion for designing innovative products and CAD in general.

I am a detail-oriented designer and engineer who thrives on unique, challenging and creative projects. I have been trained in mechanical, electrical, and industrial engineering. I excel in...Read more

I am a detail-oriented designer and engineer who thrives on unique, challenging and creative projects. I have been trained in mechanical, electrical, and industrial engineering. I excel in engineering design and computer aided drafting. I have a passion for continuous improvement and thinking outside the box. I have been a designer since 2004. that year I started taking engineering classes while I was still in highschool. Early in my education I was fortunate to be entered into an engineering competition (SkillsUSA) and won first place at the state level and second at the national level. When I entered college my main focus was mechanical engineering I have continued my education in electrical and structural engineering. This gives me the advantage when designing because I can foresee design issues due to electrical, manufacturing, or structural requirements.

About Me: In the past twenty plus years, working within large manufacturing facilities, I gained a considerable amount of experience. During this time I have been exposed to various complex...Read more

About Me: In the past twenty plus years, working within large manufacturing facilities, I gained a considerable amount of experience. During this time I have been exposed to various complex mechanical, tooling and manufacturing problems and have gained a tremendous amount of hands on knowledge for solving these problems, giving me the necessary skills and abilities to improve and correct such problems that impede a company causing it to have lower quality and productivity. I have strong skills in the areas of tool making, tool design, product design, electronics, CAD, and automated machinery along with a proven ability to manage a company and feel that these qualities will make a positive impact on your facility. I look forward to hearing from you in the near future. Best Regards, Eddie

Hello. I am Gershom from NewDev Technologies, LLC. I am a Mechanical Engineer (Bachelor of Science in Mechanical Engineering). I am a certified Solidworks Professional and certified in the...Read more

Hello. I am Gershom from NewDev Technologies, LLC. I am a Mechanical Engineer (Bachelor of Science in Mechanical Engineering). I am a certified Solidworks Professional and certified in the Fundamentals of Engineering. I have seven years of experience in mechanical engineering and ten years of experience in mechanical design with extensive experience using Solidworks, AutoCAD, and Pro-E. I am capable of producing prototypes of designs via 3D printing, CNC machining, and other fabrication techniques that NewDev Technologies, LLC has direct access to. Today, advances in technology happen at an accelerated rate. New developments lead to exciting possibilities and provide opportunities for everyone to bring to life that which was once thought impossible. In the pursuit of pushing these new ideas to applications, NewDev Technologies, LLC aims to be your affordable source of high quality engineering design, services, and support using advanced knowledge, experience and capabilities. NewDev Technologies - at the forefront of technology.

I am a Mechanical and Drafting Engineer with a background in product development and marketing strategies. I own a local design firm with which I work primarily in the firearms and defense industry...Read more

I am a Mechanical and Drafting Engineer with a background in product development and marketing strategies. I own a local design firm with which I work primarily in the firearms and defense industry designing and producing high quality aftermarket parts and assemblies for both private and commercial markets. I currently hold 3 patent pending designs/products in the firearms industry with 3 more being added in the second quarter of 2017 with new product releases. I have a keen understanding of metallurgy, product development, and working within manufacturing practicality guidelines as well as an individual manufacturer's machining capabilities. 3D modeling is where my skills are best put to use as I love creating products no matter their complexity or the overall challenge in front of me. I am able to design parts or products of any size quickly and efficiently. I also have the ability to quickly create basic models with complete assemblies or sub-assemblies according to your needs and specifications.

My company, Next X Design is the perfect partner for Established Manufacturing companies, Entrepreneurs, and startups on developing new products. One-stop service from Solidworks Design,...Read more

My company, Next X Design is the perfect partner for Established Manufacturing companies, Entrepreneurs, and startups on developing new products. One-stop service from Solidworks Design, prototyping, through ongoing Engineering Support. Expert in developing physical products that involve Steel Fabrication, Sheetmetal, 3D printing and CNC machining. www.nextxdesign.com to see more! Thank you again.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !Read more

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

I am a mechanical engineer and have worked in some sort of design or manufacturing setting for almost 10 years. I specialize in helping companies do three things: 1. Making your product more...Read more

I am a mechanical engineer and have worked in some sort of design or manufacturing setting for almost 10 years. I specialize in helping companies do three things: 1. Making your product more cost-efficient to produce 2. Refining your product so that it is easy for the customer to use 3. Accelerating your development process. I know speed is key when getting any new project started so I get you what you need ASAP. Some of my accomplishments so far -Helped a company that raised 500k in crowdfunding to develop the product they are now selling, reducing their manufacturing cost by over 20% -Helped a company raise their first round of funding by designing and prototyping their first product -Worked with product development firms with large customers to work out kinks in their designs and fabricate their prototypes -Worked with another crowdfunding campaign to make develop their beta-testing product. -Designed tooling for robotic arms to automate manufacturing processes resulting in massive reduction in labor cost I am proficient in the following disciplines -SolidWorks 2018 -Inventor 2018 -FEA (Finite Element Analysis - finding the weak points in a structural design) -Rapid prototyping (3D Printing, CNC Machining, etc.) -Design for manufacturing I work with a small 3D Printing company here in Chicago that can produce very high quality 3D prints with an excellent turnaround time. I also have a complete workshop with saws/mills/drills/CNC where I can build pieces or prototypes for virtually any project. I love working with startups to get their product moving. I like the fast pace environment and love seeing something we work on go to market.

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge...Read more

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge and intellectual stimulation of the the work that I enjoyed for my entire career. So, I formed an LLC and purchased licenses for CATIA and Solidworks and have been performing contract tool design projects for former employers and new customers alike for several years. The types of tools I have designed include: o Composite airframe components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs) o Jigs and fixtures: major and sub-assembly tools, drill jigs, installation fixtures o Tooling for Composite air-frame components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs, etc.) o Weld fixtures, electron beam welding tools o Ground support equipment o Machining holding fixtures o Conceptual tool designs for manufacturing planning o Inspection tools o Test fixtures

A well thought out CAD model can save many unnecessary headaches and costly design oversights downstream. No matter how big or small of a part or mechanical assembly, a CAD model will be the...Read more

A well thought out CAD model can save many unnecessary headaches and costly design oversights downstream. No matter how big or small of a part or mechanical assembly, a CAD model will be the keystone in a robust final product. However, this is always easier said than done, turning an idea into a 3D model in a computer isn’t always a walk in the park, this is where I come in. My experience is in CAD and in-depth knowledge of mechanical designs which accumulates to turning your idea into a reality, on your screen. If the resources allow, the idea doesn’t need to stop there. With hands-on experience in machining (CNC), additive manufacturing (3D printing), and composites, I can assist in making your idea a reality. In addition to robust CAD models and assemblies, I can also offer: - Finite Element Analysis and comprehensive reports - Detailed part drawings - Technical writing - Renderings I have engineering experience in automotive, mobility, and outdoor recreation equipment design, specializing in suspension, battery enclosures, and belt drive systems. I look forward to working with you on the next revolutionary idea, no matter how big or small.

总部位于波士顿的机械工程师4年以上经验erience in mechanical design & CAD. - Advanced 3D modeling skills; able to produce parts, assemblies, and drawings in Onshape. - Expertise in...Read more

总部位于波士顿的机械工程师4年以上经验erience in mechanical design & CAD. - Advanced 3D modeling skills; able to produce parts, assemblies, and drawings in Onshape. - Expertise in designing for 3D Printing and CNC machining. - Strong writing skills, able to create sketches, presentations, reports, and mechanical drawings. - Able to print and ship parts using in-house 3D Printers if needed for the project. - Experience in part sourcing as well as working with fabrication vendors. Available for free consultations and happy to answer any questions you may have!

迪特里希林德,体育从弗吉尼亚理工大学毕业(2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus...Read more

迪特里希林德,体育从弗吉尼亚理工大学毕业(2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in materials and machine design and specializes in custom mechanical assemblies and automated systems. Specific capabilities include mechanical and electromechanical design, CAD, FEA and design validation, component and assembly manufacturing, procurement, assembly, and testing. Dietrich worked as a Systems Engineer, mechanical engineer, and sr. mechanical engineer. He has developed custom tooling for unique and specific projects. He has designed and manufactured a large scale metal 3D printer. Additionally he has designed equipment for automating processes to speed up manufacturing or reduce labor intensive applications. Dietrich is able to design with a wide variety of materials including alloy steels, aluminum, Inconel and other nickel-based alloys, carbides, and a wide variety of polymers. He has experience with mechanical systems such as linear actuators, miniature and large scale electric motors, combustion engines, pulleys, gears, solenoids, weldments, belts and other drivetrain components. His manufacturing capabilities include CNC milling, CNC turning (lathe), electro-discharge machining, welding, and 3D printing in both polymers and metals. Deliverables include consultation, design, CAD models, 2D manufacturing drawings, manufacturing of custom parts and assemblies, sourcing and selection of off-the-shelf parts, and component and assembly testing and validation.

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies:...Read more

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: Engineering Materials, Statistics & Probability, Manufacturing Operations, Dimensional Analysis, Modelling, 3D CAD, Test Analysis, Communication, Prototype Development, Design Improvements and Optimization, Machining and Fabrication Process, Project Management, Materials Research, Troubleshooting, Fabrication, Modeling Contact Daniel regarding design and manufacturing engineering opportunities.

-3D CAD Design -Injection Molding -Plastic Part Design -Mechanical Engineering -Product Design -Product Development -Fusion 360 -CNC Machining From 3D modeling to low volume...Read more

-3D CAD Design -Injection Molding -Plastic Part Design -Mechanical Engineering -Product Design -Product Development -Fusion 360 -CNC Machining From 3D modeling to low volume production, designing parts for injection molding and CNC machining, I have managed all stages of product design and development in a wealth of fields and modalities. I've saved large corporations in excess of $350,000/yr and got start-ups their first products to market.

I am a degreed mechanical engineer with 28 years in the field. I have designed and released many products to the market. I work mainly with machined metal and some injection molded plastic parts....Read more

I am a degreed mechanical engineer with 28 years in the field. I have designed and released many products to the market. I work mainly with machined metal and some injection molded plastic parts. I have extensive experience with rubber for gaskets. I also have skills designing cables and wiring.