3D Hjälp | First test project

Need the sketch/measurements of each unit converted into a CAD drawing so we can have a 3D prototype printed.

Design two symmetrical Rhombicuboctahedrons (Rohm' for short) for printing on Prusa 3D MK2. The 1st Rhom' needs to be made of 2 parts that can be connected to form the complete shape. The width of the Rhom' should be 100nn from face to face. Each edge of this Rhom' needs to have a 5mm high 'fence' sticking outward. Two inner benches or plates need to be constructed in the inner space of each of the halves. The 2nd Rhom' is also made of 2 parts but without fences and without benches. It is a simple Rhom'. It needs to fit exactly on the 1st Rhom' from the outside. so that the 1st Rohm' go inside the second one. The attached jpg and max files depict the 1st Rhom'. However the max file is full of mistakes and should not be used as anything but as a general reference. Nor the 'fences' need to be constructed as V shape as in the max files. Please ask me anything which is not clear.

我需要有人来做我的某一部分3 d anchor stl file a little thicker. Nothing complicated at all! The guy that was working on this file is really swamped with work and cannot complete this edit. This job should literally take less than 30 minutes if you know what you are doing. On the attached picture it shows that I need to make specific parts of the anchor a little thicker to meet the minimum supported wire thickness of .8mm. Here's what the email I recieved from shapeways said: "Here is why we cannot print your model: The minimum thickness for free/supporting wires > 1.0mm and supported wires > 0.8mm for this material. Please thicken the wires of the model." I have specified what needs to be done on the picture attached. Please message me if you need clarification. If you know what you are doing and have worked with stl. files and understand the thickness minimum that shapeways requires for 3d printing then this should be a no-brainer.

We are looking for a ring that will eventually be printed in sterling, featuring bare branches. Ring band needs to resemble a branch (or branches), and the top of the ring needs branches wrapping about it. Inside this ring we'll be adding an element later, so we need a pocket underneath the branches that will fit an item that is approx 5mmx20mm. The design sketch shows a bit of a lip to the pocket from the side view, this will help keep the item in place. Once the design is approved, we'll need it in US sizes 5-13.

Hi, Freelancer, i need help from graphic designer, Just iam starting New business, i would like to have Logo and all required stationaries (Logo Design, Power point presentation them and Visiting Card Design and Letter HEAD Design.) Please note following information will help you for your contest 1-Company product is - Engineering service provider in Mechanical/Architect/IT/Graphic design, present website is www.sonenengineering.com this is old site and not covering all versicle, (Present website is not good after these design i want develop website design, i may required your help for rendering of images, page design etc.) 2-You can think 3d logo, you can think symbol with globe, you can think combination of both, iam open to all ideas not specific. 3-Sonen mean is sunrise 4-I prefer descent corporate logo, i do not like too dark, too crowded. 6-For power point presentation theme i have attached one example what i mean. 7-For Visiting card i will provide contact details at final stage. 8-letter head also required descent. Deliverable : All source files and and onset pdf, Jpg. company name is sonen engineering solutions iam expecting something different from regular so that will help me to take ealy decision, presently all looks similar concept.