打开我的浓缩咖啡机

我们正在寻找一个风扇的现代设计，将由一个12V直流无刷电机供电。设计方案必须满足以下所有要求才有资格获奖(请阅读所有要求直至最后):设计•现代的外观和感觉•全新的设计，没有重新设计现有的模型•风扇必须使用风扇叶片，所以没有戴森模型•创新和广泛的受众(见图1 -情绪板)•使用优质塑料进行高质量的表面处理•组件/部件必须(几乎)无缝产品要求•紧凑-尺寸见图2•轻•刚性•坚固-颠簸条件下•易于使用•安静•安全-不允许丢失手指•耐用4。性能•高输出•低使用率•高效!5.技术要求•使用12V直流无刷电机•使用12V接线•易于使用的锁定机构•易于使用的定位解决方案产品说明:本次比赛将包括设计一个由12V直流无刷电机供电的风扇。风扇底座:风扇需要安装在先前设计的底座上(图3)，因此12V接线必须从电机外壳穿过风扇到底座的中心点。风扇叶片:设计风扇叶片是比赛的关键部分。 The design of the fan needs to facilitate the maximum blade surface possible within the size restrictions of the overall model. Also the fan blade has obviously safety restrictions, so caging of the fan blade is required. This has to be in line with the esthetics of the overall design but shouldn’t interfere with its performance. Positioning and locking: The fan needs to be able to turn/pivot in all directions and be able to be locked in any position. The locking mechanism needs to be low tech, easy to use and in line with the esthetics of the overall design. Also it has to be strong and be able to resist bumpy conditions. Motor: The fan will be powered by a 12V motor (for dimensions see image 4). The fan will be operated by a potentiometer mounted on a PCB (for schedule see image 5) of which the form can be shaped to fit the design (needs to have realistic dimensions for production). The motor and the potentiometer are both external components, so selecting or designing them are not part of the contest. It is important that you have taken into account the dimensions of both parts, the wiring that will be used and the weight the motor has. Speed Control: The speed should be controlled through a turning knob connected to the potentiometer. This knob is an integral part of the design and should be aligned with the overall look and feel of the design. Wiring: Wiring is an essential part of the design and needs to be done efficient and realistically. Furthermore the wiring needs to be accessible for assembly and concealed in the design. Overall requirements: • All solutions need to be manufacturable and preferably seamless integrated where possible; • Parts need to be manufactured using injection moulding with minimal mould complexity; • On conclusion all files should be of a professional quality (including STEP files) so they can be handed over to our Injection Moulding partner; • Non injection components should be minimal and easily available in the market or easily manufacturable; • Modern, minimalistic but high quality look & feel is an absolute must. Documentation: Please provide high quality rendering images (in three colors, matted black/grey, glossy white and glossy red)and preferably 3D PDF(.U3D) files during the contest. STEP + STL files are required on completion. Communication: We will provide comments and give feedback on every entry as soon as possible. Also we will use the rating system available on the dashboard and use the discussion board for general information or comments. We will look at every entry and work as fast as we can, so no need to send unnecessary PM’s. Award: We will award the 1st price ($2,000) to the best overall idea that meets - or only needs minor polish to meet - ALL the requirements. Attachments: Image 1 - mood board Image 2 - contrabase Image 3 - flexbase / power source Image 4 - 12V Dc brushless motor Image 5 - PCB

我正在寻找创造一种新型的服装扣件。我希望实现的基本规格如下。该紧固件由两部分组成。盘子:(例如连接到背包上)磁盘(连接到手电筒为例…它插入到板上以形成紧固/锁定)板规格:1。尺寸:不大于17mm × 17mm，深度2-2.5mm厚需要能够容纳一个12毫米的圆(磁盘)，将固定到它。3.插入磁盘的压力磅:目标是10磅或更少4。 Weight that it needs to be able to hold 100 lbs 5. Pounds of pressure to release disk, 10 lbs or less 6. Functionality: Ideally the fastening system would be push in with a 20-25 degree or less "twist" out. Needs to have the ability to "lock" (lock in this case means, not release so that the user can trust the fasteners ability to hold the objects that are attached to it and they will not fall off. 7. Ideally, the plate can accommodate the separation of the insertion force of the disk from the rotational force that allows the disk to release so that it can be placed on different weights of material. DISK 1. The disk can not exceed 12mm in diameter/size and needs to be 3mm (or less) in thickness. 2. The disk will be attached/mounted to a different object that will hold that object to the plate. 3. Ideally requires 20-25 degrees or less of rotation to release from the plate 4. Ideally it can accommodate a straight "snap in" insertion, or a "ski-binding" toe to heel or side to side snap in. A good concept to look at for inspiration is the clips bike peddle. MATERIALS: Open to anything USABILITY: Needs to be able to handle the wear and tear of at least 100,000 insertions and releases without losing its strength. MECHANISM: I am open to any form of mechanism including (but not limited to) electric, magnetic spring, rings, teeth, gears, pins etc. LOOK AND FEEL: Modern American style (think Apple), needs to have clean lines, nice smooth face, with a beveled edge etc. as It will be used on a fashion/apparel product. INSTALLATION: The design needs to consider how the factory will install both the plate and disk onto to their respective materials/accessory.

我正在寻找一个机器人割草机的工业设计。我想要一个看起来与众不同的产品。有两个主要组成部分，一个机器人和一个基站。我想象这个机器人大约是12英寸x 12英寸x 8英寸。机器人可以与基站对接。我喜欢白色、橙色或黑色的设计，加上简单的机器人标志形象:http://www.simplerobots.com/blog/wp-content/uploads/2015/03/logo_inline.png以下是目前市场上的一些割草机机器人:http://www.husqvarna.com/us/products/robotic-mowers/husqvarna-robotic-mowers-for-homeowners/ http://robomow.com/en-GB/product-category/mowers/ https://www.deere.com/en_INT/products/equipment/autonomous_mower/tango_e5/tango_e5.page我附上了一个想法，我有什么可能看起来像，但我相信你可以做得更好。我将奖励第一名(1500美元)给满足或只需要少量润色就能满足所有要求的最佳整体理念。无论是否符合要求，从创新和独特的角度来看，我将奖励第二名的价格(500美元)。我会尽量定期提供反馈。 I recommend starting with low fidelity ideas and getting feedback before refining them. Towards the end of the contest, I will run a survey with around 100 users. I would prefer SolidWorks 2015, but am willing to deal with another format for a great design or designer. This contest will be short. I understand if the final designs are a little rough as I expect to continue refining them (ideally with your help).

我们正在寻找一个连接/插件系统的设计。该系统应由两个主要部分组成;1.“底座”将被安装在一个表面上(例如墙)。2.“contro -Base”contro -Base是一个适配器(附件连接-例如一个点)，可以点击/卡扣/滑动到基座上。注意:附件的重量可能高达1公斤(可能在颠簸的环境中)，这需要考虑到“底座”和“反底座”的设计。最好是直径约为7厘米的圆形，高度尽可能低，不干扰设计要求。2.将连接到一个12伏的电源点•12伏的电线从后面(穿过墙壁)或从侧面(在墙上)。 Wires should be easily connected to the bottom of the Base. • The design should take into account easy attachment of the 12 volt wire to the Base by the user. • Also in case the wire is connected from the side of the Base there should be an opening / gate. 4. Will be fixed to a surface using screws. • The design should take into account easy accessibility for the user when mounting on surface. 5. Will pass 12 volt current to the Contra-Base once the Contra-Base is fixed onto the Base through a solution that is: • Low tech • Full proof The Contra-Base: 1. Should click/snap/slide/connect (or other) onto the Base; • Once attached on the Base, the Contra-Base should only be able to disconnect through manual intervention; • The locking mechanism should be very solid and as low-tech and full-proof as possible; • Once locked, the Contra-Base should not be able to turn on the Base, however the placement of the Contra-Base should not be limited by a (single) defined position; • Release mechanism should not be by force, but by intervention. Again, the solution should be as low-tech and full-proof as possible. 2. Should receive the 12 volt current from the Base (see “Base” #5.) and forward it to the accessory (e.g. spot) mounted on the Contra-Base. Requirements: 1. All solutions need to be manufacturable and preferably seamless integrated if possible; 2. To be manufactured using injection moulding with minimal mould complexity; 3. The files should be of a professional quality (including STEP files) so they can be handed over to an Injection Moulding company; 4. Non injection components should be minimal and easily available in the market or easily manufacturable; 5. Modern, minimalistic but high quality look & feel is an absolute must. Also when the Contra-Base is not attached to the Base, the Base should still look good and not technical. Please provide High Quality rendering views + preferably .U3D files during the contest. STEP files required on completion We will award the 1st price ($1500) to the best overall idea that meets – or only needs minor polish to meet – all the requirements We will award a 2nd price ($500) for the best innovative idea for the easy connection solution of the 12 volt wiring to the “Base”. • Needs to be integrated into the design of the “Base”, as low tech as possible and without any complex (expensive) external components. We will award the 3rd price ($500) to the best innovative idea for the 12 volt current transfer solution from “Base” to “Contra-Base” • Needs to be integrated into the design of the “Base” and the “Contra-Base”, as low tech as possible and without any complex (expensive) external components. Attachments: Whiteboard screenshots: 1. Potential Wiring situations; 2. Electrical wire connection to the “Base”; 3. Fixation of “Base” to wall; 4. Fixation of “Contra-Base” to “Base”.

我正在寻找一个家庭管家机器人与制造规格的工业设计。我想要两种型号。一个用触摸屏作为脸，另一个没有——使用老虎的脸，并在眼睛和嘴巴上添加灯光，以显示它说话的时候。这两个模型的设计看起来都像一只可爱的老虎，可选的衣服可以把机器人打扮成猴子、鸡、狗、兔子的样子。请在设计时考虑到额外的衣服如何安全可靠地附着在一起。此外，机器人还需要有一个挂钩，挂钩在婴儿车上，这样它就可以轻松地带到外面。使用注射成型。以下是机器人需要具备的一些规格，因此您可以将其考虑到设计中:尺寸:56 x 35 x 35厘米重量:5-8公斤，大部分重量在机器人的底部外部组件:•可充电电池垫/站•可以挂在婴儿车上内部组件:•w 1080高清夜视摄像机•2 w发言人22毫米隔膜•麦克风•1 hdmi输出•1 usb输出•1 sd卡插槽•空气质量传感器•感烟探测器•地面检测传感器测距仪传感器•••对象检测传感器4电机反馈控制•头旋转2轴:1 + / - 90°,2 + 80°、-60°•基地运动360°(2驱动轮,第三轮支持)•电气可充电电池•Wifi和SIM卡环境:健壮的可以承受被打翻了规定:公司名称:Smart Robotics(写在机器人背面)如果您有任何问题或建议请随时与我联系。交付:•机器人的两种设计:一种有屏幕作为机器人的脸，一种没有•一种服装选择设计和如何穿上衣服的说明•机器人的3D动画说明它的移动•制造规范见目前市场上其他机器人的链接: https://www.indiegogo.com/projects/buddy-your-family-s-companion-robot/x/11984391#/story Cute Tigers http://kodomo.benesse.ne.jp/ap/tv/en/ http://www.qiaohu.com/ See attached for manufacturing specification