AutoCAD - Sports Equipment Design Project

design (bottle - cap- and package) for a luxurious natural perfume brand, 685 US $ per 100ml and 356 US $ per 30 ml

- a Family of LED Streetlights (5 Variants). - Need a market changing design.. which will define and change the market. - Basic standard design and descriptions given below. - Basic industry designs pictures have been attached in the ZIP file. Sizes: As per below 5 variants.

This is about a first product draft, which shall later be turned into a production ready design. I need an enclosure for a custom made electronic part. The rough form-factor should be similar to a navigation system (see attached files) with a display in front and parallel enclosure boundaries, slightly rounded edges. The display is 4.3 inches wide (see technical details attached) and should be included in the rendering. The enclosure should be 4 cm deep. As a bonus, the display shows attached bar diagram. At the back, there should be the possibility for a DIN rail mount, top hat rail EN 50022 – 35 × 7.5 but also for direct wall mount using screws or mounting to a bar with cable ties. At the front left side of the enclosure, I need a C14 inlet to add a power cable and a Schuko socket: https://en.wikipedia.org/wiki/Schuko or CEE 7/3 socket. See attached figure of the design. The material should be dark grey with a bit reflective surface. Please add our logo to the upper left corner of the front, below the display. If it fits optically, it could glow a bit in green.

We are a manufacturer of Remote Control Toys. We are looking to design a line of flying animals using the base of a current helicopter (attached are pics). We will need the designer to design the outside body in the shape of a Pig, Making a remote control flying pig. The landing gears can be taken off, and the pig will encompass the whole helicopter body. Please submit design 3D design work for a flying Pig.

2D to 3D for prototype 3D printing