一个可以穿越月球的轮子!

Sub 350mm可折叠，模块化臂，电池包，负载不明的挂载点无人机。框架设计需要考虑到现场装配所需的最小工具。如果需要工具，紧固件等必须围绕常规多工具的能力。设计还应在零照明环境下接近2分钟的现场组装。设计应基于增材制造能力，碳纤维作为生产的首选材料。

四层木框架联排别墅风格的开发，下面有停车场。62 x 250，跨度超过车库14英尺，最大19。地板托梁Eng。LBL梁，外部石材，有外部渲染和立面开始。室内布局已经达到95%。

大家好2022世界杯直播时间，我叫弗兰克。我住在美国科罗拉多州。我有一个自己设计一架飞机的主意。我想先建造一个更小的远程控制版本，看看它的外观和飞行效果。我的计划是张贴这个比赛，并有文件打印在泡沫产品。然后我会添加电机和伺服，并把加强和覆盖它将凯夫拉尔或碳纤维。然后我将放飞它，并做出必要的改变。简单地说，我最终想要建造一个全尺寸的电动飞机能够短时间起飞，但仍然能够快速飞行。我有纸上的基本计划，附件是文件。我想做的是把它转换成一个非常时尚，未来，性感的CAD文件。 I will then have it cut out of high-density foam blocks, so the design needs to be configured so that it can be cut up into blocks that can interlock precisely together. Inside of these blocks would be cut outs for structural element (Like carbon fiber tubing). The file attached shows my plan for the full-sized aircraft. The remote control model I want to build will need to be about 1/5 sized. The craft will need to be in separate elements that can be pressed neatly together with interlocking components. The tail will have the two separate components. The top wing, which articulates, will be a separate component. The Alierons will be separate. and the rest of the aircraft will need to be cut into small enough pieces for the CNC machine to cut The airfoil shape will be NLF(1)-0115

帮助设计一个通用工业资产保护系统的创造性概念，该系统包括(1)传感器单元，(2)报警HUB和(3)自动控制单元。总体概念是，改造系统能够(1)感知危险，(2)向操作人员发出警报，(3)能够发出自动响应，以确保在工业环境中对操作人员和资产的保护。组件描述:1。传感器:应该很小(大约5x5cm)薄，包含太阳能电池板，电子设备，足够耐用，可以承受打击。它们将被放置在车辆的外部，或工业车间周围。建筑应该是类似防弹玻璃的东西，以耐用，但透明的太阳能电池板的功能。请选择一个运动设计，同时牢记可制造性。请稍微关注一下传感器的安装选项，例如:传感器可以连接到一个漂亮的底座，可能很容易拆卸更换。对这些规范之外的创造性设计开放。2. Alarm HUB: Combine the following into one product: “Emergency Hazard Warning Beacon” + “Google Nest Thermostat” + “Wifi Router” + “DJI Mavic Air 2 Controller.” If that doesn’t make sense, read on. The Alarm HUB will connect to the sensors and provide visible and audible warning if any dangers are detected. Target dimensions should be relatively small around 15x15x4cm, but still be visible as a warning light in an industrial setting. First it should resemble an Emergency Hazard Warning Beacon similar to an emergency light bar on a police car or fire-truck. Secondly it should be aesthetic like a fancy like the Google Nest thermostat, or a wifi-router or something of this sort as it will be placed in multiple places like on the dash of a car, on the exterior of the car, mounted near the control systems for a industrial plant, or mounted vertically on the industrial plant wall next to some equipment. It should include a simple interface with a few buttons and a small LCD screen. Thirdly, most importantly the alarm HUB MUST have a built-in clamp for holding a smart-phone as the system will be enabled for use with phones or tablets to act as the screen. Use the DJI Mavic Air 2 controller for design inspiration for the phone holder clamp. Additionally the phone holder clamp should be able to accept a tablet-holder system so a tablet can be used. Again, reference drone controller tablet holder designs as there are multiple examples. 3. Automatic-Control-Unit: will be a way for the asset protection system to automatically respond to a detected threat. For example, a system which is plugged into an outlet may be plugged into a outlet-style automatic-response-unit so that the device can be shut down if a threat is sensed by the system. Get creative here and propose a few different form factors for possible automatic-control-units. Please reference the attached Word Doc. For further documentation.

我们有兴趣聘请某人谁有经验或能力为鞋类和鞋类相关项目创建CAD。