Ghost Hunting Equipment Mold DesignBlind

inElectronic Devicesheld byHelloChakra
Contest Closed
  • Open
  • Choosing Finalist
  • Ended
Description:
Greetings,

We are developing currently a device that will be used for Ghost Hunting Equipment.

The device will be a radio device, with specific features and functions which are intended to be utilized to be communicating with spirits.

We are looking to do a front and back mold/design appearance which will allow us to be unique and special on the marketplace.

You can find the current top 3 models in the market using the following link:www.amazon.com/s

Here they are:
1:www.amazon.com/Spirit-Ghost-Hunting-Equipment-Radio/dp/B00NABGFSM/ref=sr_1_7
2:www.amazon.com/Spirit-Box-Temp-Built-Flashlight/dp/B08S5MPV52/ref=sr_1_3
3:www.amazon.com/SBox-Ghost-Scanner-Spirit-Recorder/dp/B07KXZ5VL5/ref=sr_1_4

We would want to aim to develop something different from all 3 models, yet, in the same time, keeping the functionality of a radio, as the mold will have to be around some form of radio device.

I am also attaching a few references for a few models

More information on the product:

A ghost box is a device used to verbally communicate with spirits. Many of these gadgets continually scan radio frequencies, creating a din of white noise. “The idea is the spirit can use that white noise to communicate in some way, either verbally or through EVP sessions,” Ober says. Users can simply listen for disembodied voices, or yell questions into the void and hope for an answer from beyond.

It is frequently used with other ghost haunting equipment such as cameras, flashlight, temperature meter, emf meter, voice recorder etc

You can use spirit box just to search for spirit voices or you can ask questions and wait for answers.
Wants:
1. The design has to be unique and different, while still keeping a design of a radio in the mold
2.There has to be place to have proper buttons, so the device could have it's features, like seen on the competitors. There are specific buttons, and each button has each features.
Additional Information
Concept Design Specs:
- 9 buttons - 8 of which need to be grouped together - 9th button is "power on/off"
- Screen on face - For FM/AM Frequency
- Speaker on face
- (1) USB, (1)Audio in, (1) Audio out on side
- Optional: external antenna
- Dimensions: *Not to exceed* L:4in W:4in H:0.75 inches
- This is a HANDHELD product, please keep that in mind with dimensions

Entries

= Buyer's Rating
#37ghost hunting equipment mold designby一些kadambur
Sep 3, 2021 10:00
#35ghost hunting equipment mold designby一些kadambur
Sep 2, 2021 6:44
#33Gost hunting design_3byatekd
Aug 30, 2021 17:22
#28ghost_detector-007bykumarvikash
Aug 26, 2021 15:14
#27ghost_detector-007bykumarvikash
Aug 26, 2021 15:13
#26Ghost Hunting Equipment Design 1byJoaquín Cardoso
Aug 26, 2021 12:10
#25Gost hunting design_2byatekd
Aug 25, 2021 12:58
#24MF01 - By Adriano Ordoz BarissabyAdriano Ordoz Barissa
Aug 25, 2021 10:06
#22Spirit contactorbyMohamedBz
Aug 23, 2021 15:29
#16Gost hunting design_1byatekd
Aug 20, 2021 9:22
#15Ghost Hunting Equipmentbysherifelsheikh
Aug 19, 2021 21:32
#10Ghost Device 1byleed61
Declined
Aug 17, 2021 21:18
#9RADIObyZOUHAIR
Aug 16, 2021 16:25
#7幽灵狩猎设备概念Designbyrushanr
Aug 15, 2021 20:00
#4幽灵狩猎设备概念Designbyrushanr
Aug 12, 2021 20:20
#3Ghost Radiobymickc
Declined
Download Files
    Aug 12, 2021 6:24
    #2Ghost Hunting Equipment Mold DesignbyCDdesignSTUDIO
    Aug 10, 2021 20:23
    #1Inotoal concept requerimentsbydgrabulosa
    Aug 9, 2021 23:48

    Discussion

    HelloChakra

    Buyer

    Mon, 23 Aug 2021 07:01:33 +0000
    It will be a USB-A port
    Wed, 18 Aug 2021 18:17:47 +0000
    Hello, what type of USB plug do you need?

    MohamedBz

    Designer

    Tue, 17 Aug 2021 16:04:06 +0000
    Okay, thank you.

    HelloChakra

    Buyer

    Tue, 17 Aug 2021 15:01:11 +0000
    We do not need a full plastic molding (manufacturing solution, drafted angels, thickness analysis, filling process analysis, fixation solutions...)

    We require at the moment a form design.

    MohamedBz

    Designer

    Tue, 17 Aug 2021 12:02:16 +0000
    Hello, The thing i want to understand is that you need only a form design or a fully prepared model for plastic molding (manufacturing solution, drafted angels, thickness analysis, filling process analysis, fixation solutions...). I would like to know what should I model.

    HelloChakra

    Buyer

    Tue, 17 Aug 2021 06:18:55 +0000
    @atekd - Thank you for spotting that. It has been corrected - the 9th button is power on/off - we will not be naming buttons as the functions are not set in stone yet.

    atekd

    Designer

    Mon, 16 Aug 2021 19:09:00 +0000
    You have mention : 9 buttons - 8 of which need to be grouped together - 8th button is "power on/off", Are there 8 button or 9 button and u plz name the 8 or 9 button so that i display on the button (volume + & -, etc)

    HelloChakra

    Buyer

    Sun, 15 Aug 2021 00:44:28 +0000
    Gibbo - We did not choose a winner for the "Water Fountain Indoor - 3D Model Design" because, unfortunately, none of our manufactures could produce in reality any of the designs we actually liked.

    rushanr - We provided feedback on every design submitted thus far.

    rushanr

    Designer

    Fri, 13 Aug 2021 13:02:37 +0000
    Any feedback for designwould be appreciated. Thank you

    MohamedBz

    Designer

    Thu, 12 Aug 2021 20:26:45 +0000
    @CDdesignSTUDIO, do you mean that even a prepaid contests can be a fraud ?-please respond!

    Gibbo

    Designer

    Thu, 12 Aug 2021 08:19:43 +0000
    Who was the winner of "Water Fountain Indoor - 3D Model Design"? Did HelloChakra choose at list the finalist or not? 'cause I have a lot of ideas for this project but I don't want to waste time

    CDdesignSTUDIO

    Designer

    Wed, 11 Aug 2021 15:11:09 +0000
    He never paid his last project task.I think this is just gathering of different ideas.

    HelloChakra

    Buyer

    Tue, 10 Aug 2021 10:38:27 +0000
    Hello all,
    We have added Concept specs to help guide your innovative creations. These are not concrete but should be seen as guidelines for concept creation.
    Thank you!
    Mon, 09 Aug 2021 23:27:59 +0000
    Awesome project! Just to clarify what languages will ghost speak? Will there need to be text to speech or speech to text? Or is everything through the speaker?

    HelloChakra

    Buyer

    Mon, 09 Aug 2021 16:06:11 +0000
    1. Attachments have been submitted
    2.我们不是100%确定的确切数额tons we need on the front panel. We would want to have the option to iterate it. For the purposes of initial design, we can do the same amount of buttons competitors are doing, which seem to be 8 total buttons.

    atekd

    Designer

    Mon, 09 Aug 2021 02:16:04 +0000
    Can you plz share the dimensions of the Equipment, How many button need on the front panel (share the button name), Do u need ports like USB or Headphone, Do u need digital screen and antenna.

    sherifelsheikh

    Designer

    Sun, 08 Aug 2021 21:13:14 +0000
    Hello, No attachments yet

    Similar Contests on Cad Crowd

    Mini-ITX Computer Case
    Hi Everyone! This contest is for the smallest Mini-ITX computer case with the following requirements: -Includes rendering of a mini-itx motherboard -Includes rendering of two nvidia 1080 video card in sli configuration -Enough room for liquid cooling on cpu and video cards including radiator fan(internal or external). -Includes rendering of 800watt SFX-L PSU
    Panic Button with logo
    Denis, we need your help urgently. The lighting is not working for us on the light silver shell and it's coming out really dark on our end. Can you please create a render for us where you swap out the exclamation point with this logo? And show it in a variety of colors? Here are the instructions: 1. Swap out exclamation point with this logo 2. Show it in a variety of colors - maybe 4 or 5 logo colors. Please keep the logo treatment the same as this exclamation point treatment. Nothing should be different except the exclamation point becomes this logo. 3. Shell color is the light silver shell. 4. I have attached the logo file plus a mock of what we're looking to achieve. 5. One render where it is closed as well where you can see “armed” light 6. Timeline: tonight. Is this possible? We need it for a meeting tomorrow morning PST.
    Electronic necklace device
    其电子设备挂的链neck. 2.5 x 2 x 1 cm is the size of electronic component inside of it, however we dont want it to be square. Those dimensions are given as rough estimate of total volume of device. It is water proof. 1 usb-c port on a side with a cover. And one sliding switch. And a place for a chain to go through.
    Klein two way radio
    We are going to make a new housing / face design for our two-way radios (walkie talkies). Must be professional, not a kids-toy design. Something rugged, ergonomic, and aesthetically pleasing.
    Gridseed Scrypt ASIC Mining Frame - Acrylic Waterjet & CNC
    Howdy! Let's do something futuristic. Cryptocurrency mining, heard of it? There's specialty computer hardware used to hash mathematical algorithms in a distributed network to generate digital money! This project is to build a frame to sexily mount 10 of these specialty computers to in hopes of cleaning up some messy mining rigs out there. Speaking of messy rigs, here's a video of some good and some bad examples of the Gridseed ASIC miners. http://www.youtube.com/watch?v=Wcb8VIheP94 In the attached image TheDrawingBoard.jpg you'll see some ideas but I welcome your own input if you believe you've got something that equals win. Ask questions, let's do this!