人类与自然交织的凉爽之家

设计目标-开发一个3D模型的外观，内部和人体工程学的飞行汽车。其结果是3D模型和渲染能够在SolidWorks (its, stp)中打开。开发阶段:-美术设计、图形文件开发;-开发一个设计选定的曲面模型，生成STP文件;

大家好，非常感谢大家观看我们的比赛。我们非常感谢您的兴趣。如果您有任何问题或想知道您是否在正确的轨道上，请给我们发送问题或经常检查。在未来，我们很可能会继续为获奖者提供工作机会。我们正在寻找3D设计的个人安全设备。我们正在寻找你最好的和最有创意的设计，为一个时尚，现代的设备，是便携式的，所以你可以把它放在你的钱包或公文包，但在你会很高兴地展示在架子上。这种设备的大小应该和12盎司的可乐罐或书夹差不多。它应该是独立的，这样就可以放在桌子上或架子上。设计中应该包含一个摄像头，可以360度安装在设备顶部，也可以集成到设备中。它将包括一个被动红外传感器、扬声器、麦克风插槽和频闪灯。 On the back, it should have a slot for a usb-c cable for charging, a power button and either a four-button key pad or a touch screen for an unlocking pattern. We also need it to be durable so it could take a fall or potentially a throw across a room. Also, we think black may be a good color but we are open to suggestions. We are not looking for the wiring on the internals (although the inside should be hollow to allow for these), we are simply looking for the exterior design. If you have ideas on the inside, we will happily review. We have included our initial prototype design for reference. We have moved away from that design. We want you to think about what you would like to see on the table next to you that makes you feel safe but at the same time really catches your eye. We have also attached some pictures of current home security devices. We do not want any copies of these but they can provide you with some reference. The logo is unnecessary but include if you like. Thanks very much and good luck!

这是一个为病人个人使用而设计的产品。该产品是一种手/手腕强化装置，适用于40-70岁的患者，他们希望提高握力，恢复因年龄、疾病或受伤而失去的独立性。总体思路:1;一个双手装置。可移动/可更换的结尾，提供不同的握持选项可调节的阻力为握力锻炼，可以设置在不同的阻力水平4。它的形状可能像一个有弹性的哑铃，在两个可互换的把手之间有一根阻力杆——但这是可以解释的。重要的是，它可以用于手腕伸展，而不仅仅是手腕弯曲-其中一个握把选项将需要灵活的橡胶指孔。连接电阻杆应具有相当的灵活性，耐用性和可调的各种电阻。7. Prefer it does NOT require electricity or batteries - but still an option 8. Product should be 6-18 inches in size 9. Ease of use/simplicity in design is important 10. Product will be sold at a premium price-point, so needs to be robust and professional in look and feel 11. The end grip-cups would be best designed as ball-shaped and of a few different sizes and firmness, etc. 12. An additional end grip will be a finger-insert device (shaped like 5 finger rings connected together) and flexible for finger extension.

你好:)这比赛是一个小垂直mini-ITX电脑机箱与以下规格/要求:-铝(3毫米厚度的单部件如板或梁)——必须与数控可生产的(一方铣)——眼睛捕捉前面板的Mac Pro但不同;)——所有的板都必须可以举起的板必须与一个简单的固定机制未正确对齐,螺丝,别针等等应该只股票/标准件-足迹高度不应超过:400mm宽:200mm长:300mm -气流很重要，应该从前到后，从下到上-面板应该容纳这种气流(孔或其他图案)-前面接受2个120-140mm风扇-后面应该接受2个120-140mm风扇或240mm散热器-底部或顶部应该接受至少一个风扇- SFX, SFX- l或ATX PSU - CPU通过水块或散热器+风扇冷却- 3槽GPU最大315毫米。长度- i/O可以垂直安装(上/下)，到背面，使用第二个盖子，以保持顶部的清洁外观等…你可以自由选择视觉风格:NZXT H1符合Mac Pro:)

我们正在寻找飞行汽车的内部和外部设计。总体描述:类型:四轴飞行器容量:一人电机数量:4个车轮数量:4个前轮转向。风机外形尺寸2947x2973转子直径1250mm，环外径- 1316mm，环高- 180mm。转子之间的距离:左右1654毫米，前后转子之间的距离1630毫米。后轮通过前轮驱动控制。左右轮间距:933mm前后轮间距:1962mm