1:64 Railway Stockcar - CAD Designer to Scale Down Model for 3D Printing
in3 d打印ing Designheld byred_dog_sixLast seen:
Contest Closed
-
Open
-
Choosing Finalist
-
Ended
Payment PendingEntries
Discussion
Good day!
我do not require the wheels. I can add my own set. As well as the couplers. If it is easier to make in parts that will work. Train is running on HO track.
Andrew
我do not require the wheels. I can add my own set. As well as the couplers. If it is easier to make in parts that will work. Train is running on HO track.
Andrew
我s it ok if I make it as 13 parts + the 8 wheels so that can snap together and be glued, that way it can be more accurately printed? also can you send me the track type that you will be using... It has been some time scene I have had a train set so im not 100% clear on what the track widths are.
Good day!
我f it can be done sure. If not, it is not a big deal as I can weather it using paints.
Thanks
Andrew
我f it can be done sure. If not, it is not a big deal as I can weather it using paints.
Thanks
Andrew
Do you want the wood to look broken on the sides like it is in the pictures?
Good day!
Prefer the end doors on the one end to swing open and the side doors to slide. I will able to live with the end doors not swinging open.
Thanks
Andrew
Prefer the end doors on the one end to swing open and the side doors to slide. I will able to live with the end doors not swinging open.
Thanks
Andrew
Do you want swinging doors or sliding doors?
Similar Contests on Cad Crowd
Secret Electrical Box
Hi all, We are looking for a 3D design of electrical box, There is a plug on the box to connect EV charger cable( the side with the holes example 1) and the other side should be able to connect to the electricity plug on the wall. There are 2 LED lights on it, one for one/off 1 for active. There is one button on the box that is called override. We would first choose the best design and then change the colour and logo to match our preferences. The box size should not be bigger than 15x20 cm. Example 1: http://www.4ev.co.uk/content/images/thumbs/0026217_5-metre-32-amp-mercedes-b-class-electric-drive-ev-charging-cable-straight.png
Air Dump 1:64 - CAD Designer to Scale Down Model for 3D Printing
Small air dump in 1:64 scale. Drawings from onsite measurements are provided are in 1:32 scale. Data sheet Mechanical drawing also available.
Design an Extraordinary Cabinet Knob or Pull
我自己的旋钮。零售内阁硬件公司网站。我want to manufacture a line of unique, 3D printed cabinet hardware. This contest is for the design for one cabinet knob or pull. However, should I find a designer whose work I like, there could be far more work following. The final knobs will be produced in metal. They will need to be strong enough for daily use, stunning to look at, and capable of being screwed into a cabinet, which means they should have a threaded screw hole capable of receiving an 8-32 screw. The knob diameter can be anywhere between 1 1/4 inches and 1 1/2 inches. Also, the final piece needs to be capable of being submitted directly to Shapeways, and conform to all of their criteria for strength, wall thickness, etc. I'm not a techie, so if I have to modify anything to upload it, the knob is never going to get made.
Need 3D image of ambulance designed for 3D printing
As a gift to a donor, we want to give them a 3D replica of a custom ambulance that they donated. Going to be 1:43 scale.
All Terrain Chassis for Camera Crane
我am interested in designing, prototyping, and constructing an all terrain chassis for a camera crane. Contact me with questions or if you cannot open the links provided below. Please view our website to see the crane CraneShot.com Please view this video for a rough analogy of the chassis we want YouTube.com/embed/oXz0Nlt1WJE?rel=0 Thank you, Zoe Skontos CraneShot Los Angeles, CA USA zskontos@gmail.com +1.310.902.9172
red_dog_six
Buyer