1:64模型——CAD设计师缩减模型3D Printing
in3D Printing Designheld byred_dog_sixLast seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Prepaid PrizeEntries
Discussion
Good day!
This car is running on narrow gauge track. So the car is S Scale running on HO track. HO track gauge min is .649"
(16.50 mm).
Thanks
Andrew
This car is running on narrow gauge track. So the car is S Scale running on HO track. HO track gauge min is .649"
(16.50 mm).
Thanks
Andrew
我should back up a second, is this car going to be used on a track? (probably a dumb question)
Fantastic. Shapeways is awesome I have my own Shapeways account. Just one more question :
Can you verify the inside dimensions of the track you are using. The inside width is what I am after. I can get all of the other dimensions I think this drawing is actually very easy to read. If you have digital calipers that would be perfect. Thanks
Can you verify the inside dimensions of the track you are using. The inside width is what I am after. I can get all of the other dimensions I think this drawing is actually very easy to read. If you have digital calipers that would be perfect. Thanks
Frosted Ultra Detail material and for for handrails best done in Strong&Flexible.
Do you know which Shapeways material you are going to use?
Sorry that is the only drawing available. Yes ug can be used to create 3d.
hai i can use ug and create 3d modelling please advice
Please can we get a clearer drawing
Can you get a better drawing? not all dimensions are clear
Similar Contests on Cad Crowd
1:64 Railway Stockcar - CAD Designer to Scale Down Model for 3D Printing
1:64 Stockcar. Modeling the later series with the end with the swinging open doors.
Air Dump 1:64 - CAD Designer to Scale Down Model for 3D Printing
Small air dump in 1:64 scale. Drawings from onsite measurements are provided are in 1:32 scale. Data sheet Mechanical drawing also available.
Secret Electrical Box
Hi all, We are looking for a 3D design of electrical box, There is a plug on the box to connect EV charger cable( the side with the holes example 1) and the other side should be able to connect to the electricity plug on the wall. There are 2 LED lights on it, one for one/off 1 for active. There is one button on the box that is called override. We would first choose the best design and then change the colour and logo to match our preferences. The box size should not be bigger than 15x20 cm. Example 1: http://www.4ev.co.uk/content/images/thumbs/0026217_5-metre-32-amp-mercedes-b-class-electric-drive-ev-charging-cable-straight.png
Design an Extraordinary Cabinet Knob or Pull
我自己的旋钮。零售内阁硬件公司网站。我want to manufacture a line of unique, 3D printed cabinet hardware. This contest is for the design for one cabinet knob or pull. However, should I find a designer whose work I like, there could be far more work following. The final knobs will be produced in metal. They will need to be strong enough for daily use, stunning to look at, and capable of being screwed into a cabinet, which means they should have a threaded screw hole capable of receiving an 8-32 screw. The knob diameter can be anywhere between 1 1/4 inches and 1 1/2 inches. Also, the final piece needs to be capable of being submitted directly to Shapeways, and conform to all of their criteria for strength, wall thickness, etc. I'm not a techie, so if I have to modify anything to upload it, the knob is never going to get made.
Need 3D image of ambulance designed for 3D printing
As a gift to a donor, we want to give them a 3D replica of a custom ambulance that they donated. Going to be 1:43 scale.
red_dog_six
Buyer