In-car vending machine

As discussed with Antanas

We want to make a silicone placemat for toddlers with extruding bowls (probably 3 bowls). The shape should be a dinosaur (maybe stegosaurus or t-rex). Please see attached elephant for an idea of what we are looking for. Simple yet elegant and appealing. The mat size should be 10"x7.7"x1". The bowls should comprise most of the mat, besides perhaps a 1" to maybe 1/2" border. The edges should allow for spilling a drink and the liquid would not run onto the table. Past the raised edges though, the mat should slope down towards the table. The idea is that the toddler (or even adult really) cannot get his fingers underneath the mat because it slopes towards the table. We also need a small credit card style tool to lift up the mat since it will basically be impossible to pull up from the table once you lay it down.

We are looking to create a 2-in-1 solution for a dispenser that hold a standard roll of aluminum foil and also standard roll of plastic wrap. The purpose is providing a clutter free, organized and practical solution in the kitchen for storing and use of aluminum foil and plastic wrap. The dispenser can be placed into most kitchen drawers with no issues of the drawer closing/opening or it can also be placed on the countertop making it blend into the kitchen surroundings. Current Problem Aluminum foil and plastic wrap rolls come in many lengths and widths, based on the brand. It would be great if the dispenser can be adjustable to fit the size of rolls being used. So it would have some partitions that can be adjusted or added on, taken off (ie. Lego like). Here are the dimensions of foil and plastic wrap for the most popular brands: Aluminum Foil Kirklands Brand 13.78” x 4.29” x 4.29”, 9lbs -> (this is the 12”x1000’ roll) Kirklands Brand 19.40” x 3.70” x 3.70”, 10.45 lbs --> (this is the 18”x500’ roll) Solimo Brand 12.00” x 2.10” x 2.10”, 2.40lbs --> (this is the 12”x250’ roll) Whole Foods Brand 12.50” x 1.90” x 1.90”, 0.70 lb --> (12”x75’ roll) Plastic Wrap Reynolds 13.54” x 2.40” x 2.17”, 0.71lbs --> (this is the 12”x225’ roll) Reynolds 13.66” x 4.09” x 3.9”, 2.73lbs --> (this is the 12”x1000’ roll) Reynolds 17.1” x 5.8” x 5.8”, 6.9lbs --> (this is the 15”x2000’ roll) Glad Cling Wrap Brand 12.50” x 2.50” x 2.30”, 0.73 lb --> (12”x200’ roll Kirklands Brand 14.96” x 6.02” x 5.83”, 8.8 lbs --> (this is the 12”x3000’ roll) Competitor Here is a link to a competitor. https://amzn.to/3NqfhWP Here are the main negative comments about this competitor product, so want to avoid these in the design: - Wood comes damaged with splits, cracks making it appear cheap quality (see video link) https://bit.ly/3yHjEbZ - - Does not fit the roll of foil or wrap being used (width and length of space is too small) - Plastic cutter that sits ontop is too short to cut the full length of the foil or wrap and jams (see video link) https://bit.ly/3Lr9FdB - Plastic cutter blades are always exposed

Hello! This is my first attempt at a campaign and hoping to use it as a launching pad for more work. For this project, I'm an artist that needs ultra-creative unique painting FRAMES to surround 11x14 single-sheet paper. I'd love the FRAMES to be part of the painting itself, not just a separate accessory that goes on the wall. I'm looking for the absolute most over the top beautiful, gorgeous, creative ideas for what I can only describe my work to be abstract, splatter type. **** I've included some of my paintings as examples. *** I included an origami paper flower I made, with the type of paint splatter that will not only go into the final paper but the FRAME itself.

(See attachment for figure drawings) Shot glass shape (will be plastic moldable) with sloped/curved upper region (Fig. C) 90mm in height, fully assembled (Fig. C) 52 mm diameter at the top; 35 mm diameter at the bottom (Fig. C) Desired wall thickness: 2 mm 2 pieces (Fig. A and Fig. B) screw together to form the item (Fig. C) Top piece (Fig. A): Height of 20 mm plus 5 mm male threads (we are flexible on the dimensions of the threads based on designer’s expertise) The brim should be rounded Bottom piece (Fig. B): Height of 70 mm includes 5 mm of corresponding inner female threads at the top The objective is to create an inner chamber when the two pieces are screwed together that will hold in a solid piece, but allow liquid to flow through. This should be achieved by having the bottoms of both pieces include a stylized, wavy “grate”. (Fig. D).