Floor Plan for a Home RemodelBlind
inArchitectural Designheld byscooterLast seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
Draft up a floor plan for a phase 1 & phase 2 of my home remodels. I have chief architect and can do some basic designs. Looking for some creative layout ideas with the space I have now (phase 1) then the added space that phase 2 will add. I'm stumped on how to layout the interior walls the best way.
Wants:
I'll provide 2 files or the house. One will be the current house layout and the other will be the future layout without some of the interior walls. I'm a noob, so may be best to start a new file. Looking for a creative way to lay out everything. Looking to end up with 3 or 4 bedrooms, dinning area, kitchen, livingroom, and/or a den. No need to finish out all the plan details. Just looking for the floor layout for the 1st floor at this time, and of course the basement exterior walls. Would like winner to finish out the design with further compensation of course.
Don't Wants:
Don't want full design just 1st floor interior wall layout and basement walls.
Software:
- Chief Architect Premier (x7)
Prepaid PrizeEntries
Discussion
Showing last 20 comments -View All
Scooter, thank you for uploading the clean file,, as of now your Scope of work are confusing me,, what are your need or wants by this drawing as of now (Phase 1) ?
Scooter, radical idea here. NO WALLS! ALL OPEN LAYOUT! I'll take my 80 bucks now please :D
Akuma X - I see what you mean now. I was unable to open the .dwg file to see what they looked like. I'll fix later today. Sorry about that.
Akuma X - Not sure what your asking for? Can't you just save 2 copies of the future_CC, and delete the basement from one copy, then delete the 1st floor from the other saved copy? That is all I would/know how to do.
Hello, I'll have something for you in the next couple days in PLN format which you can open in Chief.
Scooter, Can you upload a drawing that is not overlapping both plan? (e.g 1st floor and ground floor separated)
sadok - Stairs to basement TBD some in the new future design, as the current entrance stairway (not shown in current floor plan) will be demoed for expansion of foundation.
Todor - * Ideally Chief Architect 3D plan files
Todor - Ideally
but would consider any. As I'm more concerned with a solid floor layout. I can always redraw your proposed floor plan in to the chief architect at a later time.
but would consider any. As I'm more concerned with a solid floor layout. I can always redraw your proposed floor plan in to the chief architect at a later time.
Akuma X - Stairs to basement TBD, as current entrance stairway (not shown in current) will be demoed for expansion of foundation. Clear ceiling height is 95". Interior walls mostly likely be gypsum board double wall with paint. Not concerned with the electrical or plumbing at this point. More concerned with having a floor layout that I'm happy with.
Madhu25 - AutoCad format would be ok.
where is the stairs in this building?
Hi Scooter,
Would you confirm which of the following is your minimum acceptable requirement for final presentation of the entries:
1.首席架构师3 d计划文件;
2. Chief Architect 2D plan files ;
3. Autocad 3D dwg files;
4. Autocad 2D dwg files;
5. jpg pictures files.
Thanks in advance
Todor
Would you confirm which of the following is your minimum acceptable requirement for final presentation of the entries:
1.首席架构师3 d计划文件;
2. Chief Architect 2D plan files ;
3. Autocad 3D dwg files;
4. Autocad 2D dwg files;
5. jpg pictures files.
Thanks in advance
Todor
hi scooter,
can i ask where is the location of existing stairs access from basement to 1st floor? and what is the clear ceiling height? (finish floor level of the basement to bottom slab of 1st floor)
Insulated internal wall partition or you make same as existing 100mm gypsum board double wall with paint?
Will you consider PIPING Route? (Sanitary Drain / Water Supply) e.g termination or extending branch of old existing sewer line or supply water line.
Load calculation or additional circuit breaker/AMPS for your Main Distribution Panel (Power Supply)?
can i ask where is the location of existing stairs access from basement to 1st floor? and what is the clear ceiling height? (finish floor level of the basement to bottom slab of 1st floor)
Insulated internal wall partition or you make same as existing 100mm gypsum board double wall with paint?
Will you consider PIPING Route? (Sanitary Drain / Water Supply) e.g termination or extending branch of old existing sewer line or supply water line.
Load calculation or additional circuit breaker/AMPS for your Main Distribution Panel (Power Supply)?
Hello,
Can i submit it in autocad file.
Regard's
Madhu
Can i submit it in autocad file.
Regard's
Madhu
Added dwg files. Not sure what they look like, as I can't open them. Also, added jpgs instead of pdfs. Thanks
Hello sir; would you be able to send the files in a PDF format to me as well? Once I review them, I will naturally have a few other questions regarding specific functions for end use. I look forward to seeing what can be done with the space! Thank you
Thank you in advance, Scooter!
Best regards,
Roxana
Best regards,
Roxana
Hi, I'd like to participate, but would need DWG or DXF files. Can you upload these file types?
Gustavo, just looking for the 1, the final end game, design. To get there though the build will take place in 2 phases. Phase one (the master room/bath I'm plan ing to start in 7 weeks. Hope that clears it up some. Thanks!
Similar Contests on Cad Crowd
The Groves
one page 8 1/2" x 11", currently hand drawn, community is asking for one done on "Autocad".
Convert Drawing of 1300 sq ft to CAD
Castillo Properties 4627 Roswell Rd: Create floor plan from paper version of 1300 sq ft house. Hand drawings
shop site plan and floor plans required ASAP
我必须尽快将图纸提交市议会change of use of commercial property. The shop was used to be bakery. I want shop to be a retail shop. I need to fill planning permit along with 2 sets of drawings to council. 1) Old floor Plan. 2) New floor Plan.
Residential house
你好我有一个floor plan for a house in new Zealand that i need some concepts drawn up for the elevations and roof design in dwg format. I am open to Ideas that any architects have to add to the design. option of modern or traditional design would be great, feel free to alter the floor plan attached to make your desing work but still keep the same basic layout concept. a few guide lines: 2.4m Ceiling height concrete floor timber frameing construction mix of brick veneer and rendered cladding floor to ceiling sliding door in the kitchen lounge/family room must have and soffit overhang. thanks and have fun.
画廊的影响ction calculations
This task requires calculating which profiles to use for a gallery structure! No need to design or draw anything in this task. Only calculate. The attached plan was made by an engineer for building a gallery in my house from steel profiles but I suspect the profiles he chose are an over kill so I'd like to hear some more opinions. I assure everyone I will ultimately build the gallery under his approval. The 40 square meters gallery is to be used for 2 living rooms for my kids. It will hold normal furniture that such rooms should hold. The main beam would be HEA, IPN or another profile you may recommend for decreasing the profile height. The main beam would be made of 2 parts welded together and an RHS or IPN pillar underneath the connection point. I am not sure yet where the pillar would be, therefore I need the main beam profile calculated for 2 options: 390cm + 600cm or 270cm + 720cm. Each part of the main beam might be a different profile so please calculate the minimal required profile for each part. I would also like to know what profile measures I would need if there was to be no pillar in the middle of the main beam and it would be a one piece of 990cm. All other 3 sides of the gallery have an existing wall and part of this wall has an existing reinforced concrete belt (yellow in the drawing). There are also 4 existing reinforced concrete pillars as appears in the drawing. It is planned to have a UPN profile (welded together as one) all along the 3 other sides. The whole structure will be supported by 6 RHS pillars (the main beam middle pillar might be IPN) that will be attached with Jumbo screws and chemical adhesive to reinforced concrete floor. At the back plane of the gallery the 3 RHS pillars are very close to existing reinforced concrete pillars. Is it possible to attach the UPN to the existing pillars and make do without these 3 RHS pillars? The main beam and the back plane will be connected with 15 IPN beams. I still don't know if the length of these beams will be 429cm or 470cm so I need both options calculated. The floor surface will be made of several layers for isolation with 30mm pine wood at the top. I need to know what are the minimal measures for all the profiles in my plan and according to which assumptions the calculation was done. One last question. Above the gallery there is a 10meters wide by 8 meters long wooden shingle roof (as in the photos) that is supported by small wooden pillar in the middle. I need to install a 10meter steel beam from side to side at the middle of the roof so that I can remove the supporting wooden pillars. What would be the minimal IPN profile to use for that? Would IPN 100 or 120 do the job? Calculate the following profiles: Main IPN or HEA beam at 720cm + 270cm (2 different profiles?): Main IPN or HEA beam at 600cm + 390cm (2 different profiles?): UPN: Width IPN beams at 429cm: Width IPN beams at 470cm: RHS pillars: IPN pillar: Roof 990cm IPN beam: Any improvement suggestions are welcome.
Percie_Gala