Exercise Equipment Storage SolutionsBlind

in3D Modeling Designheld byMike Power
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
We have a number of products which are sold to commercial gyms. They desire storage solutions for these items that take up minimal footprint int he building but maximize storage.

I have attached a file with photos of existing storage solutions on the market and also the type of items we need to store in the gyms.

We want the units to be modular so they can expand for more equipment as needed.

We want the units to be multifunctional storing more than one type of equipment if possible.
Wants:
Color : Black or gray are the prevalent colors in the industry
Design style: We are open to modern looking with sweeping lines or rugged industrial.
Don't Wants:
We do not want just copies of designs already on the market. We want to maximize storage in a small area.
Software:
  1. SolidWorks
Additional Information
Please categorize the items based on use area in the gym.
Kettlebells - Up to 20 units
Dumbbells - Up to 18 units
Weight Plates - Up to 36 units
Barbells - 2 units

Entries

= Buyer's Rating
1st Winner
#10GYM equipment storage rackbyRatnesh
Nov 11, 2017 18:56
#2STORAGE solution concept1byjohrek
Nov 4, 2017 13:59
#12Design of gym rackbyRaymond
Nov 15, 2017 17:58
#1Storage solutions - GYM conceptbymilivojastudio
Nov 2, 2017 2:00
#11Equipment StoragebyMahbub
Nov 12, 2017 12:28
#17Exercise Equipment Storage SolutionsbyRRM
Nov 19, 2017 18:07
#15Exercise Equipment single portable Storage SolutionsbyRRM
Nov 19, 2017 18:00
#14Concept 1byKP HARISANKAR
Nov 19, 2017 14:13
#9storage-1_concept-1.stp,storage-2_concept-1.stp,storage-3_concept-1.stpbyKarthikeyan Arumugam
Nov 10, 2017 9:24
#8Exercise Equipment StoragebyAkash Gupta
Nov 9, 2017 18:22
#7Store Unit.stpbyQuoc Viet
Nov 9, 2017 16:56
#5STORAGE SOLUTION concept 2byjohrek
Nov 9, 2017 0:32
#13storage-1_concept-2.stp,storage-2_concept-2.stp,storage-3_concept-2.stpbyKarthikeyan Arumugam
Nov 17, 2017 9:10
#6Exercise Equipment StoragebyAkash Gupta
Nov 9, 2017 6:16
#16Exercise Equipment Storage SolutionsbyRRM
Nov 19, 2017 18:04
#4Storage solutions - GYM concept v2bymilivojastudio
Nov 8, 2017 22:47
#3storage solution concept 1 (modified)byjohrek
Nov 7, 2017 9:53

Discussion

Ratnesh

Designer

Wed, 29 Nov 2017 18:29:37 +0000
Hope winner will be selected soon...

milivojastudio

Designer

Thu, 09 Nov 2017 17:56:25 +0000
Hi Mike,
I will check my concept and comment it.

Mike Power

Buyer

Thu, 09 Nov 2017 15:59:54 +0000
We prefer IGS format for the final files

RRM

Designer

Thu, 09 Nov 2017 15:58:46 +0000
hi, Is that ok with catia model file?
i mean in .catpart OR .stp OR .STL format ???

Mike Power

Buyer

Wed, 08 Nov 2017 21:05:15 +0000
Hi Mike, you mentioned a modular design where the storage can be expanded. Could you please share the minimum and maximum size?
There is not a real minimum or maximum as it depends on the gym. I would say no shorter than 3 feet. Maximum would grow by adding units.
Wed, 08 Nov 2017 21:03:13 +0000
Hi Mike, you mentioned a modular design where the storage can be expanded. Could you please share the minimum and maximum size?

Mike Power

Buyer

Tue, 07 Nov 2017 15:32:03 +0000
Solidworks is not strictly required as long as we can get a compatible file.

Ratnesh

Designer

Tue, 07 Nov 2017 15:29:48 +0000
Hi Mike.. Is solidwork compulsory, or feasible with other software also.
Fri, 03 Nov 2017 11:45:17 +0000
Please mention the quantity as well for each part. so that storage will be according to your requirement

Mike Power

Buyer

Thu, 02 Nov 2017 15:26:27 +0000
Have you any desire of either wall mounting or stand ? A: We desire both type of solutions.
Thu, 02 Nov 2017 07:36:06 +0000
so u want to make a rack for this ???
Thu, 02 Nov 2017 04:54:42 +0000
Have you any desire of either wall mounting or stand ?

Similar Contests on Cad Crowd

Motion sensor
This project is to design the housing for a motion detector for commercial office buildings. it should be approximately 2.5-3.0 inch circle and the body should be no more than 1.0 inch thick. the circle can be bigger if the edges sweep out to with a nice curve back to the ceiling surface. it will mount to a standard t-bar ceiling grid. (the kind of ceiling with the drop in tiles) it should mount in the corner of a light fixture with a portion of the "top" or up facing side exposed to the light fixture. and have a window on the top that looks up at the light... (for a light sensor) the window shall be rectangle and dimensions are: 33.0×10.8mm. the face which points to the room shall have a PIR lens (like this one http://www.jvs.de/Carclo_Fresnel/Drawings/PF68_12076_Drawing.pdf i'd like to receive drawings that are 3d printer ready. ease of mass production and tooling should be considered. drawings should also be open for editing by our team. Our team will add the holders, screws, clips, etc for the Electronics inside. the mounting method could be a small piece of spring steel or plastic. White plastic/PC examples: http://cdn3.volusion.com/jn7vt.cfos2/v/vspfiles/photos/HBL3-2.jpg?1416706843
Hinge for mailbox
We are designing a thick gauge aluminum mailbox (0.080” aluminum (2024 or similar) front and back; ¼” (6061 or similar) lid). We are having problems finding an off-the-shelf hinge for the lid that meets our evaluation criteria (below). Lid is a thick, flat piece of aluminum, no bends. Final product will be powder-coated.
Solidworks Car model
I am looking for someone to model in solidworks a replica of a car already on the market. I like super cars and classic cars! The file needs to be somewhat editable in solidworks and renderable in keyshot. The contest is quite open ended, the more detail the better.
Spa/health club annex
Convert a 2D, basic floor plan of spa/health facility into a 3D floor plan of spa/health facility. The project will require some creative adjustments to accentuate the look and feel of the facility to align with a spa-like environment. The addition of furniture items typical to spa/health settings will be required. This is a concept project and dimensions may change in the future as the project develops. The final objective/goal is a 3D model that can be used to confirm final dimensions, details, and other information with a larger stakeholder group as the project develops to a final stage of execution.
Dwarven Forge Bracelet
A bracelet design to complement our long standing line of Dungeons and Dragons/fantasy rpg terrain. Please view our website -- dwarvenforge.com -- to develop a sense for our product. You can also look at our recent Kickstarter campaign -- http://www.kickstarter.com/projects/1745470388/1826778276?token=2a7841d2 (see "Game Tiles" on kickstarter.com). I'd start with a bangle, probably with one main charm, a small crystal and a small charm with our logo -- kind of like "Alex & Ani" level of complexity, but for gamers. The main charm should probably be metal. The bracelets are for women, gamers or partners of gamers.