Re-Design Pool Pump HousingBlind

inProduct Designheld bygatorpjp
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
We are looking to make the outside of our pool pump more aesthetically pleasing by adding our logo, color and design elements to the outside pump housing. We could go with a more rounded look to the pump vs. the straight line look. We do need to use the same lid which is used on our current design so the area where the lid attaches needs to be unchanged, the same will go for the area where the motor attaches to the pump housing. Integrate our Logo and Orange and Blue Colors into housing.
Wants:
We will evaluate the design on adding beauty to the outside of the pump incorporating our logo and colors as well as unchanging the lid and motor area of the pump.
Software:
  1. AutoCAD
Additional Information
Here are two links to the dimensions of the pump

images.inyopools.com/cloud/descriptionimages/haywardsuperpump2.gif

images.inyopools.com/cloud/dimensions/pureline-1-hp-pump-dimension.jpg

Entries

= Buyer's Rating

Discussion

Showing last 20 comments -View All
Fri, 29 Sep 2017 12:24:15 +0000
Can I participate with NX10?

DesignAssist

Designer

Wed, 20 Sep 2017 16:41:29 +0000
Hi Gatorpjp I have had a look at the drawings. What you have now must have been quite expensive to tool or it has hand loaded cores. With the new design are you after something that looks good but has expensive tooling or cheaper tooling with a more conservative design?

gatorpjp

Buyer

Tue, 19 Sep 2017 16:48:04 +0000
I have added the engineering drawing of the original pump to the attachments section of this project, it is hand drawn not CAD but I hope this helps.
Sun, 17 Sep 2017 08:18:17 +0000
does that should be in assembled? or a single product?

DesignAssist

Designer

Wed, 13 Sep 2017 18:18:57 +0000
嗨Gatorpjp。如果你能拿到3 d数据哟u will get much better designs submitted

gatorpjp

Buyer

Wed, 13 Sep 2017 18:10:01 +0000
I'm checking to see if I can get the original CAD drawings or 3D drawings and will post those once I receive.

gatorpjp

Buyer

Wed, 13 Sep 2017 18:09:11 +0000
I'm not sure while the files are not showing up, I have since re-added the files and the files at the end of the project should be viewable.

ASC

Wed, 13 Sep 2017 03:15:49 +0000
Most of the attachments, including logo, are broken links.
Fri, 08 Sep 2017 17:39:09 +0000
nice project, I will participate

DesignAssist

Designer

Fri, 08 Sep 2017 14:51:30 +0000
Hi Gatorpjp
I would like to have a look at the design, but I cannot see the point of designing a nice shape only to find out that the important bits of the pump no longer fit inside. To ensure this does not happen, do you have 3D data for the existing pump design which you could post in STEP or IGES format?

gatorpjp

Buyer

Thu, 07 Sep 2017 12:15:47 +0000
The complete pump model # is PL2601 the manufacturer is PureLine and the Model Name is Prime the motor that is used on the pump is model # B228SE

gatorpjp

Buyer

Thu, 07 Sep 2017 12:13:03 +0000
Here is pump in dissambled state, I have also added to attachments http://images.inyopools.com/cloud/partpageimages/pureline-prime-pump-schematic.jpg
Tue, 05 Sep 2017 12:55:05 +0000
And also reference motor part number and Mfg.
Tue, 05 Sep 2017 12:54:30 +0000
Please show existing pump in disassembled state.
Mon, 04 Sep 2017 06:30:35 +0000
Is the housing need to be Fastened with the pump ?

gatorpjp

Buyer

太阳,2017年9月3日17:48:11 + 0000
Yes solid works will be fine
Sun, 03 Sep 2017 16:04:22 +0000
Is Solidworks okay ?

gatorpjp

Buyer

Sat, 02 Sep 2017 08:39:47 +0000
The dimensions have also been now added to attachments section as attachment 4 & 5

gatorpjp

Buyer

Sat, 02 Sep 2017 08:35:22 +0000
Here are two links to the dimensions of the pump

http://images.inyopools.com/cloud/descriptionimages/haywardsuperpump2.gif

http://images.inyopools.com/cloud/dimensions/pureline-1-hp-pump-dimension.jpg
Sat, 02 Sep 2017 05:39:50 +0000
Did not see any drawing/image with dimensions...at least send us outer dimensions...thanks

Similar Contests on Cad Crowd

Blank Case - iPhone Case Design with AutoCAD
你好,我有一个Iphone 5例设计。我需要它做ne in cad in order to get a quote on manufacturing the prototype, the case has four layers three of which have two parts. I need to get started on this ASAP. Thank you
Smart Water Carafe
- a glass Water Carafe that does not drip upon pouring - a smart lid that covers it up the glass part, which could block lemon slices / fruits from flowing out. It blocks dust from going in when its rested. - lid made with a combination of ABS resin, stainless steel, and silicone. Could be poured in 360 degrees all directions, and you don't have to open the lid while pouring. - prefer to have same functions / aesthetic like the Menu / Kinto water carafe - 3 sizes, 0.7L, 1L, 1.3L. Best to share 3 sizes of tubs with 1 single lid. But not a must. - Body made of boro-silicate glass, which is mouth blown - Can be lifted / held by one hand. So a reasonable diameter is required. - Dishwasher safe, no glueing.
Wooden 3d printer
I want to build a 3d printing machine out of 1/4” plywood and wooden dowels. To win the prize, I need a 3d rendering, a explosion picture of the system and a dxf or dwg file showing all the parts laid out for cutting by a cnc machine. The goal is to Repstrap a 3d printer similar to the Wally. The first thing to do is review the Wally blog at http://forums.reprap.org/read.php?185,220993 The next thing to review is the git hub site. https://github.com/NicholasSeward/ConceptFORGE/tree/master/Wally This has all the files for dimensions and parts needed This will be the starting point, nothing is set in stone, If you need things to be bigger or smaller, that is ok. 1. I have included a variety of pictures and ideas. Use them as you wish. 2. I see the arms built out of 3 layers of plywood. Bearing on top, bearing on bottom and the middle piece has a smaller diameter hole to keep bearings from falling through. Ply wood dowels should be used for indexing assembly. 3. Bearings are being used for both smooth motion and rigidity. 4. The frame and table should be tabbed so that the parts push together and self align. 5. The back is to be 2 layers. For a total of 1/2”. The back should be inset a 1/4” to allow for a future modification. 6. All parts that can ( brackets) should be tabbed to self align and position. 7. I would like to be able to flip one of the arms and have it line up with the other arm. This is for a future change to add a central carrier. (like in the original design) 8. Shaft connections to motors need to be figured out 9. To tighten the fishing line, I will be using guitat pegs. There needs to be a hole for a dowel to lock in position. 10. I would like to get all the pieces on the front side of the printer. If dimensions need to be made to frame, that is fine. 11. Bed will be multiple layers. There should be a bottom, a ring to open center to 1/2” (for a heated bed) and a pice of glass will sit on top of this. 12. Pulley to arm attachment. I have a couple of ides on this. One is to use a dowel into a bearing another is to tighten the bolt and then have a plywood key that fits around outside of bolt and keys into pulley or arm. 13. The bearings are cheap. If an extra bearing makes something easier, use it. 14. File will be cut using an 1/8th inch bit. Adjust slots for this. (ie. Add a 1/16th of an inch to each side I am sure there will be lots of questions. I will answer them as they come up. I will also send a kit (plywood and bearings) to the winner.
Ez 3D Printer
i need the casing design to house the conceptual mechanical mechanism, aim of the 3D printer Robust, aesthetic and functional, very easy to use, a must have for anyone who wants to experience 3D Printing; almost all parts are 3D printed;
Phone Case with some mechanics
The case needs to be a functional case with two tracks: BASIC IDEA MODEL LOCATED BELOW (non-proportionate) The phone measures 123.8mm x 58.6 mm x 7.6mm The phone is an iPhone 5s The screen which is inches measured 4 inches diagonally must be unlocked on BOTH sides of the case i.e. (if I was to talk the phone out and flip it in the other side of the case the screen wouldn't be covered). The side where the power button is should have nothing on to of it. the tracks need to be 4 inches long with a 3 inch track inside the 4 inch track (Radio antenna idea). The tracks need to be hinged so that they can both stand up 90 degrees of the case and lay flat (it's okay if they cover the back open area). there needs to be a wheel inside the track that moves up and down the track vertically the wheel needs to connect outside somehow (like below) the wheel needs to follow the track to the bottom of the platform where the wheel will sit so that the hinged track does not hold the wheel when it lays down. any futuristic or modern design is accepted, however creative aspects are totally left to you as long as the design is functional.