Prosthetic Cover Design

in3D Printing Designheld byChrisBuyer
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
We are looking for CAD designs for coverings for prosthetic legs. The products are generally around 450mm tall, with a proportional width similar to human dimensions.
We are specifically looking for interesting aesthetic designs.
We are open to any type of style, but it should be designed to be structurally sound. It will not have to bear weight, but will have to stand up to bumps and knocks. The final print material has not been specified, but you should assume it is an FDM print.
Your design should include some method of attaching the cover to the prosthetic.
The product will be printed in a single colour so if your design has multiple colours it will need to designed in such a way that it's easy to paint the required parts.
We intend to create a range of covers so there may be ongoing work for the successful designer(s)
You should supply us with a CAD file, ready for us to setup in Grasshopper for parametric modelling.
You can find examples of other similar products here:
unyq.com/prosthetic-covers/unyq-armor-below-knee-covers/
www.alleles.ca/leg-covers/
Here is an image of a prosthetic that does not have a cover on:jdeorthotistandprosthetist.co.za/wp-content/uploads/2015/08/FullSizeRender-4.jpg
Wants:
Aesthetic appearance
Apparent structural reliability
Securing method
Don't Wants:
Copies of existing designs
Software:
  1. AutoCAD

Entries

= Buyer's Rating
2nd Winner
#46Geometric DesignbyJustin Logan
Jun 6, 2017 18:35
#47Lattice designbyJustin Logan
Jun 6, 2017 18:38
#2prosthetic cover designbyIdham
May 25, 2017 2:36
#13COVER KAKI PALSUbyIdham
May 28, 2017 6:49
#5FIT-ALL BREATHABLE PROSTHETIC COVERbyBryce Allen
May 26, 2017 0:52
#35Double - layer network structurebyArtistic Artifacts
Jun 4, 2017 17:00
#57Forgotten Hero 1byRichard Simpson
Jun 7, 2017 7:14
#29Prosthetic_randombyManuel Zaragoza
Jun 3, 2017 0:18
#1prosthetic coverbyAdam
May 24, 2017 17:15
#41PROSTHETIC COVER V 4.0byKP HARISANKAR
Jun 5, 2017 16:04
#40CHRISBUYER-PROSTHETICCOVER A 2byMartin Arguello
Jun 5, 2017 15:33
#45Metal Plate and GroovebyJustin Logan
Jun 6, 2017 18:31
#60COVER KAKI PALSUbyIdham
Jun 7, 2017 11:22
#48ProstethicbyHichemKoncept
Jun 6, 2017 18:44
#54Crossfit Camouflage CoverbyPablo Gosso
Jun 7, 2017 2:20
#56STYLISH PROSTHETIC LEG COVERbyMOHAN CADDES
Jun 7, 2017 6:01
#3Prosthetic Cover DesignbyMahbub
May 25, 2017 6:10
#4Prosthetic Cover DesignbyREDA
May 25, 2017 16:45
#8my second models. how about this? please rate and tell me what the mistakes. thanksbyIdham
May 26, 2017 17:51
#9prosthetic cover designbyIdham
May 27, 2017 5:22
#10Prosthetic Cover DesignbyOmar Farouk
May 27, 2017 6:19
#11prosthetic cover designbyIdham
May 27, 2017 16:04
#17Prosthetic Cover version 2byOmar Farouk
May 30, 2017 20:11
#19PROSTHETIC COVER V 1.0byKP HARISANKAR
May 31, 2017 20:46
#23Prosthetic CoverbyNabilZer
Jun 1, 2017 19:29

Discussion

Showing last 20 comments -View All

REDA

Designer

Sun, 11 Jun 2017 15:46:46 +0000
Hi all,
It must be remembered that it is a design to fight and strike and it is not with 0.5 mm that we will be hit!
Good luck to everyone !

ChrisBuyer

Buyer

Thu, 08 Jun 2017 18:57:32 +0000
Hi all, Thanks for the great entries. We will review them all and make a decision early next week.

Justin Logan

Designer

Wed, 07 Jun 2017 11:22:45 +0000
需要考虑到额外的改进dered for most designs above ('including some of mine) would be, a way of prevent rotation and slipping around the pylon when the prosthetic cover is knocked. I have a simple solution that would work with several of the proposed designs with a clamp like design rather than a rubber band, if you are interested. Once you have chosen your design, I would be happy to share the idea, regardless of who you chose to win.

ChrisBuyer

Buyer

Thu, 01 Jun 2017 03:18:51 +0000
我真的希望看到更多的晶格类型结构ctures proposed if anyone is interested.

ChrisBuyer

Buyer

Wed, 31 May 2017 18:44:24 +0000
Below knee for now thanks

MR. CAD DESIGNS

Designer

Wed, 31 May 2017 14:58:34 +0000
Hi
You are looking for Ak or Bk prosthetic covers?

ChrisBuyer

Buyer

Mon, 29 May 2017 09:03:34 +0000
Hi KP,
You should size for standard European/American dimensions. The cover will be scaled for different individuals.

KP HARISANKAR

Designer

Mon, 29 May 2017 08:58:43 +0000
HI. In which country are you aiming to sell the product? If we get to know the anthropometry and percentile of body measurements, it will be easy for us to design. For a person with a height of 175cm, prosthetic cover of 450mm will cover his knee region too.

Anil Vaswani

Designer

Mon, 29 May 2017 07:09:33 +0000
Submitted design, suggest me, If any modifications required.

REDA

Designer

Mon, 29 May 2017 02:22:27 +0000
Hi ,
Now it's clear for me

ChrisBuyer

Buyer

Sat, 27 May 2017 08:36:22 +0000
Hi Justin,
Manufacturing process not yet confirmed. Most likely will be FDM, but possible we could go with SLS. If FDM, we would like tolerances to be wide to allow for wider nozzle, but will to compromise for the right design. Printing with two nozzle sizes is also a possibility to allow for finer detail on closures. Perhaps submit two versions, one with fine tolerance, and one with wide?

Justin Logan

Designer

Sat, 27 May 2017 07:53:43 +0000
Hi Chris thanks for that, do you know what tolerances your machine can print to, just so I can make sure the opening and close features work properly.
Thanks, Justin

ChrisBuyer

Buyer

Fri, 26 May 2017 19:36:46 +0000
The attachment system does not have to be 3d printed.

ChrisBuyer

Buyer

Fri, 26 May 2017 19:34:36 +0000
Hi REDA,
Sorry I'm not clear what your question means? Rates for what?

REDA

Designer

Fri, 26 May 2017 08:58:27 +0000
??? It takes rates so I know what you need exactly

ChrisBuyer

Buyer

Fri, 26 May 2017 05:31:29 +0000
Hi Justin,
The length of the pylon and distance from knee is dictated by how much of the leg remains, so will be different in every case.
Generally, I would say the pylon will be at least 100mm long.
Hope that helps.

Justin Logan

Designer

Thu, 25 May 2017 07:45:46 +0000
Hi Chris,
Trying to design a reliable fixing method. I have something in mind I am working on, but just need to know a little more about the prosthetic, ie. How tall is the 'pylon'? how far below the knee does it start etc.
Do you have a technical drawing of the prosethic, even if it is a generic one?
Thanks,
Justin

ChrisBuyer

Buyer

Thu, 25 May 2017 04:00:32 +0000
Additional information: the design needs a way to be put on and off the pylon. This means it must be easily removable. It won't be able to slip over the foot or socket so generally this means some kind of opening flexibility or mechanism to allow it to be attached and removed.

ChrisBuyer

Buyer

Thu, 25 May 2017 00:18:55 +0000
International standards for prosthetics tubes is 34mm HD, 30 mm Std, 22mm juvenile. So for this project I would suggest a target size of 30-34mm

ChrisBuyer

Buyer

Wed, 24 May 2017 22:52:00 +0000
Yes I will get those dimensions. The best option would be for the cover to connect to the 'pylon' which is the metal pole between the socket and foot. This is the most standard component across prosthetics. The socket that fits around the limb can have massive variance so probably isn't a good point of point of attachment.

Similar Contests on Cad Crowd

Underwater Drone
I would like to design a deep water drone that can reach the bottom of a lake. The drone will be roughly 2.5 feet long by 2 feet high by 1/2 foot wide. It will have an infra-red camera in front and a propeller in the back.
MACK TITAN TRUCK 1/87 scale down
I need a CAD file for 3D printing conception of miniature model truck resin kit scale down to 1/87 scale,components must have parts for building model kit, cab ,driver seat,frame body and wheels.
Hyperloop Concept Model
I need a concept design and 3D printing ready files (STL) for a Hyperloop Pod. The design should be inspired by the concept images attached. The design may be different from this concept drawing but follow the general inspiration of the concept. Creativity is still appreciated. The doors on the model should be closed. Interior features such as seats are not required. The compressor fan should be included and detailed. Please also include smaller air outlet at the back of the pod. The “air bearing” or feet should be included. The model should be scaled to be roughly 35mm in diameter and 250mm in length. For further information on the concept and inspiration see attached PDF file. “Hyperloop Alpha” This is for non-commercial purposes. The final files should be free of flaws and read to be 3D printed. I am flexible on software used. I need the CAD file and STL file as a deliverable
3D Model of Small Gold Plant
I need a 3D model of a small scale gold plant. I intend to 3D print the model. There are 5 distinct components that need to be modeled: 1- the crushing module (http://www.mbmmllc.com/product/jaw-crusher-modules/) 2- the hopper module 3- the hammer mill (duplicated X2) 4- chutes (duplicated X2) 5- shaker table (duplicated X4) I am attaching a plant layout as well as real life pictures of the components. I need a quick turnaround for the design. It needs to be detailed enough for the modules to resemble the real life components, however, it doesn't need to be overly detailed.
Human Skull Masterpiece - STL for 3D Printing
你好,我是一个艺术家生活在纽约和马一样ny artists, I am fascinated by the human skull. Long before Damian Hirst made his diamond encrusted skull, I made pilgrimages to the Metropolitan Museum of Art to look at the Holy-Grail of all skulls. The skull below was made in 17th century Germany and was carved from ivory. The softness and detail is extraordinary. More importantly, the surface is irregular. Its edges are imperfect, just as a real human skull would look after it is dug up from a grave. It is a masterpiece. It is anatomically perfect and it has an emotional gravity that is captivating. (Fortunately, ivory is banned but I also want to make a skull of my own, hence 3D printing.) Check it out here: [url=http://www.metmuseum.org/collections/search-the-collections/120023910?rpp=20&pg=1&ft=Ivory+skull&img=1#fullscreen] http://www.metmuseum.org/collections/search-the-collections/ 120023910?rpp=20&pg=1&ft=Ivory+skull&img=1#fulls creen[/url] A bit futher down in quality from the perfect ivory carving at the Met are the porcelain skulls by Nymphenburg. I love the hand painted flowers and insects on them but, more importantly, I love the negative space in the jawbone, namely, the slightly opened mouth and missing teeth. As much as I love the Nymphenburg skulls, they are way too expensive and are a bit too pretty for me. They don't have the psychological weight that the ivory skull from the Met has. What I would love to do is create my own ceramic human skull using 3D printing. I would like the skull to be around 4" in height and around 6" at its deepest diameter. I would like it to be anatomically perfect inside and out. No detail left out. I wonder if it is possible through 3D printing to match or even exceed the perfection of the ivory skull at the Met but also whittle away at the 3D model to a perfect imperfection. Ceramic would give the skull a visual richness and a heft that plastic does not have. Also, if a few skulls could be made, I could paint my own insect world on them. Finally, I have included a Human Skull Anatomy Chart. It is quite exhaustive. I am sure a real human skull can be used to make the initial 3D model but any model would have to be as exacting as this chart. I would love to create a 3D skull that is indistingishable from a real human skull, only in mininature. I hope to get some interest from all of you. This contest can be tough. It would require getting a real human skull and doing a 3D scan of it. Then, once it's scanned, the artistry of the designer would take over; such as paying attention to the postive and negative space in the design, the details, and the imperfections that happen over time with a real skull that has been buried. I hope you all can come through for me. Thanks.