住宅

我必须尽快向市议会递交更改商业物业用途的图纸。这家商店以前是面包店。我希望商店是一个零售商店。我需要填写规划许可证和两套图纸到委员会。1)旧平面图。2)新平面图。

我们想要一个自由设计师为我们公司创建一个专业的标题页。我们旧的扉页看起来不太好;请参阅“无双老扉页。pdf”文件(请忽略图纸细节)。请参阅此屏幕播放的注释:http://bit.ly/Y7Ntwa我们需要图纸生产(英制/公制)与这些尺寸:8"x11"(也需要公制)11"x17"(也需要公制)36"x24"(也需要公制)我们的标志应该包括在标题块。工作细节请见附件文件，如果您有任何问题请告诉我们。还有很多即将到来的工作，我们可能会请最好的承包商在不久的将来帮助解决。注:理想情况下，CAD软件应该是Chief Architect或AutoCAD格式，可以导入到我们的软件中。

需要为汽车经销商的内部和外部光度。需要能够告诉我们什么光的水平是最好的，你为整个经销商推荐什么产品(只LED)。

一页8 1/2英寸x 11英寸，目前手绘，社区要求在“Autocad”上完成。

此任务需要计算为图库结构使用哪些配置文件!在这个任务中不需要设计或绘制任何东西。只计算。附件的计划是由一个工程师为在我的房子里建造一个画廊用钢型材，但我怀疑他选择的型材是一个过度杀死，所以我想听到更多的意见。我向大家保证，我最终会在他的批准下建造这座画廊。40平方米的画廊将用作我孩子的两个客厅。它可以放这些房间应该放的普通家具。主梁可以是HEA, IPN或其他型材，您可以推荐用于降低型材高度。主梁由两个部分焊接而成，连接点下方有一个RHS或IPN支柱。我还不确定柱子应该在哪里，因此我需要计算主梁的轮廓2个选项:390cm + 600cm或270cm + 720cm。 Each part of the main beam might be a different profile so please calculate the minimal required profile for each part. I would also like to know what profile measures I would need if there was to be no pillar in the middle of the main beam and it would be a one piece of 990cm. All other 3 sides of the gallery have an existing wall and part of this wall has an existing reinforced concrete belt (yellow in the drawing). There are also 4 existing reinforced concrete pillars as appears in the drawing. It is planned to have a UPN profile (welded together as one) all along the 3 other sides. The whole structure will be supported by 6 RHS pillars (the main beam middle pillar might be IPN) that will be attached with Jumbo screws and chemical adhesive to reinforced concrete floor. At the back plane of the gallery the 3 RHS pillars are very close to existing reinforced concrete pillars. Is it possible to attach the UPN to the existing pillars and make do without these 3 RHS pillars? The main beam and the back plane will be connected with 15 IPN beams. I still don't know if the length of these beams will be 429cm or 470cm so I need both options calculated. The floor surface will be made of several layers for isolation with 30mm pine wood at the top. I need to know what are the minimal measures for all the profiles in my plan and according to which assumptions the calculation was done. One last question. Above the gallery there is a 10meters wide by 8 meters long wooden shingle roof (as in the photos) that is supported by small wooden pillar in the middle. I need to install a 10meter steel beam from side to side at the middle of the roof so that I can remove the supporting wooden pillars. What would be the minimal IPN profile to use for that? Would IPN 100 or 120 do the job? Calculate the following profiles: Main IPN or HEA beam at 720cm + 270cm (2 different profiles?): Main IPN or HEA beam at 600cm + 390cm (2 different profiles?): UPN: Width IPN beams at 429cm: Width IPN beams at 470cm: RHS pillars: IPN pillar: Roof 990cm IPN beam: Any improvement suggestions are welcome.