Tooway E TRIA支架

我们正在寻找假肢覆盖物的CAD设计。产品高度一般在450毫米左右，宽度与人体尺寸成比例。我们特别寻找有趣的美学设计。我们对任何类型的风格都持开放态度，但它的设计应该是结构合理的。它不必承受重量，但必须经得起磕碰。最终的打印材料还没有指定，但你应该假设它是FDM打印。你的设计应该包括一些方法，附加的覆盖到假肢。该产品将以单色印刷，所以如果你的设计有多种颜色，它将需要设计在这样一种方式，很容易油漆所需的部分。我们打算创建一系列的封面，所以可能有正在进行的工作，为成功的设计师(s)你应该提供给我们一个CAD文件，准备好让我们在Grasshopper参数化建模设置。你可以在这里找到其他类似产品的例子:http://unyq.com/prosthetic-covers/unyq-armor-below-knee-covers/ http://www.alleles.ca/leg-covers/这是一个没有盖子的假肢的图片:http://jdeorthotistandprosthetist.co.za/wp-content/uploads/2015/08/FullSizeRender-4.jpg

你好，我是一名生活在纽约的艺术家，和许多艺术家一样，我对人类头骨很着迷。早在达米安·赫斯特(Damian Hirst)制作他的镶钻头骨之前，我就去大都会艺术博物馆(Metropolitan Museum of Art)朝圣，看看所有头骨中的圣杯。下面的头骨是17世纪德国用象牙雕刻而成的。柔软度和细节都是非凡的。更重要的是，表面是不规则的。它的边缘是不完美的，就像一个真正的人类头骨从坟墓里挖出来后会看着它一样。这是一部杰作。它在解剖学上是完美的，它有一种令人着迷的情感引力。(幸运的是，象牙是被禁止的，但我也想做一个自己的头骨，所以用3D打印。)看看这里:[url=http://www.metmuseum.org/collections/search-the-collections/120023910?rpp=20&pg=1&ft=Ivory+skull&img=1#fullscreen] http://www.metmuseum.org/collections/search-the-collections/120023910?rpp=20&pg=1&ft=象牙+头骨&img=1# fullscreen [/url]与大都会博物馆的完美象牙雕刻相比，Nymphenburg的瓷头骨的质量要差一些。 I love the hand painted flowers and insects on them but, more importantly, I love the negative space in the jawbone, namely, the slightly opened mouth and missing teeth. As much as I love the Nymphenburg skulls, they are way too expensive and are a bit too pretty for me. They don't have the psychological weight that the ivory skull from the Met has. What I would love to do is create my own ceramic human skull using 3D printing. I would like the skull to be around 4" in height and around 6" at its deepest diameter. I would like it to be anatomically perfect inside and out. No detail left out. I wonder if it is possible through 3D printing to match or even exceed the perfection of the ivory skull at the Met but also whittle away at the 3D model to a perfect imperfection. Ceramic would give the skull a visual richness and a heft that plastic does not have. Also, if a few skulls could be made, I could paint my own insect world on them. Finally, I have included a Human Skull Anatomy Chart. It is quite exhaustive. I am sure a real human skull can be used to make the initial 3D model but any model would have to be as exacting as this chart. I would love to create a 3D skull that is indistingishable from a real human skull, only in mininature. I hope to get some interest from all of you. This contest can be tough. It would require getting a real human skull and doing a 3D scan of it. Then, once it's scanned, the artistry of the designer would take over; such as paying attention to the postive and negative space in the design, the details, and the imperfections that happen over time with a real skull that has been buried. I hope you all can come through for me. Thanks.

我需要一个小型黄金植物的3D模型。我打算3D打印模型。有5个不同的组件需要建模:1-破碎模块(http://www.mbmmllc.com/product/jaw-crusher-modules/) 2-料斗模块3-锤磨(复制X2) 4-斜槽(复制X2) 5-激振器表(复制X4)我附上了一个工厂布局以及组件的真实照片。我需要一个快速周转的设计。它需要足够详细，以使模块类似于现实生活中的组件，然而，它不需要过于详细。

我需要一个概念设计和3D打印准备文件(STL)的超级高铁Pod。设计的灵感应来自所附的概念图像。设计可能与此概念图不同，但遵循概念的一般灵感。创造力仍然受到赞赏。模型上的门应该关闭。内部功能，如座椅不需要。应包括并详细说明压缩机风扇。请在吊舱的后面加上较小的出风口。“空气轴承”或脚应该包括在内。模型的直径应该是35毫米，长度应该是250毫米。 For further information on the concept and inspiration see attached PDF file. “Hyperloop Alpha” This is for non-commercial purposes. The final files should be free of flaws and read to be 3D printed. I am flexible on software used. I need the CAD file and STL file as a deliverable

我需要一个CAD文件用于3D打印微型模型卡车树脂套件比例降至1/87比例的概念，组件必须有用于建筑模型套件，驾驶室，驾驶员座位，框架体和车轮的部件。