Steel Structure for Tekla

需要鳍d the best use of space for our production company building. The building it 100ftx40ft. The front 15ft is already taken with bathroom and entrance. This leaves on open space of 85ftx40ft of wide open space which we need to fill with as many 8ftx8ft rooms as possible. Each of these rooms must have it's own entry ( no Jack and Jill). These do not have to be finished plans, just an overhead view so we can get an idea of the best use of space.

- I am attaching front and side panel drawings for a home audio component. - The location for the knobs and holes are to be fixed, but I'm looking to see a 3D model, with my logo added to the top-center of the front panel. - Add text for the buttons / knobs (I will provide the text, and you play with the font/size). - Front / side panels to be BLACK (with white silk screen). Also want to see the same thing with front / side panels in SILVER (with black silk screen). - Play with the beveling to give the panel some character, but nothing over the top. - No need to be concerned with the rear panel or bottom for this project. - Perhaps we can put the company icon from the logo on the top panel. I'm open to ideas. - I need help with the design of the two large knobs. They will be aluminum. Need a design for them. - Display shown on center of front panel consists of (3) 7-segment LED displays.

The design needed is for a handle / grip that when squeezed, it will make a 3/8" square bar, which is in a 1 1/2" high extruded piece, travel aprox 2 1/2" towards the grip. See short video. This also needs to be able to lock into multiple positions when squeezed and also have an easy release so that when released it springs back into its original open position. This will be attached to the end of the 1 1/2" high extrusion. There are 2 openings in this extrusion. One along the top will be a square opening in which the 3/8" square bar will be encased and the other one will be a round hole which will encase a 3/8" round tube in which water will travel through. This round tube will need to extend out the back of the extrusion and through the handle and attach to a water hose. The handle / grip needs to extend up above the extrusion a minimal amount. The attached picture of my prototype extends way too high above the extrusion. One thought is to incorporate a rack and pinion type gear to achieve this. Any type of gear or mechanism will need to be enclosed in the handle.

Smart PGS is a system that a device that is hanging off a rail under parking lot ceiling to monitor parking spaces using camera. It monitors 6 - 12 spaces (3 - 4 per side), hence two cameras. And it shows vacancy (Green) or full (Red) or special condition ( Blue ) to guide driver for a parking spot.

It is based on the contest we posted last time. //www.johnregoli.com/contest/2655-breakaway-and-adjustable-collar-for-cats We need 3-5 aesthetics concepts based on the CAD we uploaded, maybe it can be ribbon, fish... as long as it is cat-related. Also, please minimize the level of adjustment into 3. The numeric level needed to be engraved on the wheel clearly, font can be any as long as it looks nice. The overall size of the buckle needs to be smaller, at least the same size or smaller than 22mm x 16mm. We want to make the wheel turning the switch from back to the front, like in the attached picture. But the arrow needed to be smaller. The whole CAD needs to be ready for mass production as we will open the aluminum mold for it.